Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA2211AIDDARIC OPAMP GP 2 CIRC 8SOPWRPAD |
4,020 |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 27V/µs | 80 MHz | - | 60 nA | 30 µV | 3.6mA (x2 Channels) | 45 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO PowerPad |
|
INA114APIC INST AMP 1 CIRCUIT 8DIP |
605 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 0.6V/µs | - | 1 MHz | 500 pA | 25 µV | 2.2mA | 20 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
OPA4130UAIC OPAMP JFET 4 CIRCUIT 14SOIC |
369 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 4 | - | 2V/µs | 1 MHz | - | 5 pA | 200 µV | 530µA (x4 Channels) | 18 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
THS3121IDIC OPAMP CFA 1 CIRCUIT 8SOIC |
423 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Current Feedback | 1 | - | 1700V/µs | - | 130 MHz | 3 µA | 2 mV | 7mA | 490 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA4227UAIC OPAMP GP 4 CIRCUIT 14SOIC |
964 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 4 | - | 2.3V/µs | 8 MHz | - | 2.5 nA | 10 µV | 3.7mA (x4 Channels) | 45 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
LM6172IN/NOPBIC VOLTAGE FEEDBACK 2 CIRC 8DIP |
457 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Voltage Feedback | 2 | - | 3000V/µs | 100 MHz | 160 MHz | 1.2 µA | 400 µV | 4.6mA (x2 Channels) | 90 mA | 5.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
IVC102UIC SW INTEG 1 CIRCUIT 14SOIC |
723 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | Switched Integrator | 1 | - | 3V/µs | 2 MHz | - | 0.1 pA | 500 µV | 4.1mA | 20 mA | 9.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
OPA547F/500IC OPAMP GP 1 CIRC DDPAK/TO263-7 |
1,540 |
|
Datasheet | - | TO-263-8, D2PAK (7 Leads + Tab), TO-263CA | Tape & Reel (TR) | Active | General Purpose | 1 | - | 6V/µs | 1 MHz | - | 100 nA | 1 mV | 10mA | 750 mA | 8 V | 60 V | -40°C ~ 85°C | - | - | Surface Mount | TO-263 (DDPAK-7) |
_4040233^C.jpg "OPA547T")
|
OPA547TIC OPAMP GP 1 CIRCUIT TO220-7 |
557 |
|
Datasheet | - | TO-220-7 Formed Leads | Tube | Active | General Purpose | 1 | - | 6V/µs | 1 MHz | - | 100 nA | 1 mV | 10mA | 750 mA | 8 V | 60 V | -40°C ~ 85°C | - | - | Through Hole | TO-220-7 |
_4040251^B.jpg "OPA547T-1")
|
OPA547T-1IC OPAMP GP 1 CIRCUIT TO220-7 |
514 |
|
Datasheet | - | TO-220-7 | Tube | Active | General Purpose | 1 | - | 6V/µs | 1 MHz | - | 100 nA | 1 mV | 10mA | 750 mA | 8 V | 60 V | -40°C ~ 85°C | - | - | Through Hole | TO-220-7 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
