Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS3201DIC OPAMP CFA 1 CIRCUIT 8SOIC |
473 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Not For New Designs | Current Feedback | 1 | - | 9800V/µs | - | 1.8 GHz | 14 µA | 700 µV | 14mA | 115 mA | 6.6 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
THS3201DGNIC OPAMP CFA 1 CIRCUIT 8HVSSOP |
202 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tube | Not For New Designs | Current Feedback | 1 | - | 9800V/µs | - | 1.8 GHz | 14 µA | 700 µV | 14mA | 115 mA | 6.6 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
.jpg "THS3215IRGVT")
|
THS3215IRGVTIC OPAMP DIFF 1 CIRCUIT 16VQFN |
309 |
|
Datasheet | - | 16-VQFN Exposed Pad | Tape & Reel (TR) | Active | Differential | 1 | - | 3000V/µs | - | 650 MHz | 4 µA | 12 mV | 35mA | 95 mA | 8 V | 15.8 V | -40°C ~ 85°C | - | - | Surface Mount | 16-VQFN (4x4) |
|
THS3491IDDARIC OPAMP CFA 1 CIRC 8SOPWRPAD |
1,013 |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Feedback | 1 | - | 8000V/µs | 900 MHz | - | - | 1 mV | 16.8mA | 620 mA | 14 V | 32 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SO PowerPad |
|
OPA4350UAIC CMOS 4 CIRCUIT 14SOIC |
1,425 |
|
Datasheet | MicroAmplifier™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 4 | Rail-to-Rail | 22V/µs | 38 MHz | - | 0.5 pA | 150 µV | 5.2mA (x4 Channels) | 40 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
OPA4350EA/250IC CMOS 4 CIRCUIT 16SSOP |
433 |
|
Datasheet | MicroAmplifier™ | 16-SSOP (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 22V/µs | 38 MHz | - | 0.5 pA | 150 µV | 5.2mA (x4 Channels) | 40 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SSOP |
|
|
LOG114AIRGVTIC LOGARITHMIC 1 CIRCUIT 16VQFN |
658 |
|
Datasheet | - | 16-VQFN Exposed Pad | Tape & Reel (TR) | Active | Logarithmic | 1 | - | 5V/µs | 15 MHz | 5 MHz | 5 pA | 100 µV | 10mA | 18 mA | 4.8 V | 11 V | -5°C ~ 75°C | - | - | Surface Mount | 16-VQFN (4x4) |
|
|
OPA4277UAIC OPAMP GP 4 CIRCUIT 14SOIC |
1,647 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 4 | - | 0.8V/µs | 1 MHz | - | 4 nA | 20 µV | - | 35 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
OPA445AUIC OPAMP GP 1 CIRCUIT 8SOIC |
557 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | - | 15V/µs | 2 MHz | - | 10 pA | 1.5 mV | 4.2mA | 15 mA | 20 V | 90 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
INA2128UA/1KIC INST AMP 2 CIRCUIT 16SOIC |
1,341 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | Instrumentation | 2 | - | 4V/µs | 200 kHz | 1.3 MHz | 2 nA | 10 µV | 1.4mA (x2 Channels) | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
