Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA445APIC OPAMP GP 1 CIRCUIT 8DIP |
508 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | - | 15V/µs | 2 MHz | - | 10 pA | 1.5 mV | 4.2mA | 15 mA | 20 V | 90 V | -25°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
THS7002IPWPIC OPAMP PGA 2 CIRCUIT 28HTSSOP |
153 |
|
Datasheet | - | 28-PowerTSSOP (0.173", 4.40mm Width) | Bulk | Active | Programmable Gain | 2 | - | 85V/µs | 70 MHz | 100 MHz | 2.5 µA | 1 mV | 5mA | 95 mA | 9 V | 32 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 28-HTSSOP |
|
OPA2132UIC OPAMP JFET 2 CIRCUIT 8SOIC |
627 |
|
Datasheet | OPAx132 | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 2 | - | 20V/µs | 8 MHz | - | 5 pA | 250 µV | 4mA (x2 Channels) | 40 mA | 5 V | 36 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
INA141U/2K5IC INST AMP 1 CIRCUIT 8SOIC |
2,889 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 4V/µs | - | 1 MHz | 2 nA | 20 µV | 750µA | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
THS4500IDGNIC OPAMP DIFF 1 CIRCUIT 8HVSSOP |
140 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tube | Active | Differential | 1 | Differential | 2800V/µs | 300 MHz | 370 MHz | 4 µA | 4 mV | 23mA | 120 mA | 4.5 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
OPA547FKTWTIC OPAMP GP 1 CIRC DDPAK/TO263-7 |
1,305 |
|
Datasheet | - | TO-263-8, D2PAK (7 Leads + Tab), TO-263CA | Tape & Reel (TR) | Active | General Purpose | 1 | - | 6V/µs | 1 MHz | - | 100 nA | 1 mV | 10mA | 750 mA | 8 V | 60 V | -40°C ~ 85°C | - | - | Surface Mount | TO-263 (DDPAK-7) |
|
THS3491IRGTTIC OPAMP CFA 1 CIRCUIT 16VQFN |
1,960 |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Current Feedback | 1 | - | 8000V/µs | 900 MHz | - | 4 µA | 1 mV | 16.8mA | 620 mA | 14 V | 32 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-VQFN (3x3) |
|
|
INA118U/2K5IC INST AMP 1 CIRCUIT 8SOIC |
2,437 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 0.9V/µs | - | 800 kHz | 1 nA | 25 µV | 350µA | 12 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
INA2128UAIC INST AMP 2 CIRCUIT 16SOIC |
1,141 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Active | Instrumentation | 2 | - | 4V/µs | 200 kHz | 1.3 MHz | 2 nA | 10 µV | 1.4mA (x2 Channels) | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
|
INA114BPIC INST AMP 1 CIRCUIT 8DIP |
325 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 0.6V/µs | - | 1 MHz | 500 pA | 10 µV | 2.2mA | 20 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
