Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
.jpg "OPA569AIDWP")
|
OPA569AIDWPIC OPAMP GP 1 CIRCUIT 20HSOIC |
2,308 |
|
Datasheet | - | 20-SOIC (0.295", 7.50mm Width) Exposed Pad | Tube | Active | General Purpose | 1 | Rail-to-Rail | 1.2V/µs | 1.2 MHz | - | 1 pA | 500 µV | 9mA | 2.4 A | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 20-HSOIC |
|
INA129UIC INST AMP 1 CIRCUIT 8SOIC |
654 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Instrumentation | 1 | - | 4V/µs | - | 1.3 MHz | 2 nA | 10 µV | 700µA | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA4350UA/2K5IC CMOS 4 CIRCUIT 14SOIC |
1,250 |
|
Datasheet | MicroAmplifier™ | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 22V/µs | 38 MHz | - | 0.5 pA | 150 µV | 5.2mA (x4 Channels) | 40 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
THS3201DBVTIC OPAMP CFA 1 CIRCUIT SOT23-5 |
1,010 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Not For New Designs | Current Feedback | 1 | - | 9800V/µs | - | 1.8 GHz | 14 µA | 700 µV | 14mA | 115 mA | 6.6 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
THS3095DDARIC OPAMP CFA 1 CIRC 8SOPWRPAD |
2,952 |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Feedback | 1 | - | 7300V/µs | - | 235 MHz | 4 µA | 900 µV | 9.5mA | 280 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO PowerPad |
|
|
OPA4277UA/2K5IC OPAMP GP 4 CIRCUIT 14SOIC |
2,589 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 0.8V/µs | 1 MHz | - | 4 nA | 20 µV | - | 35 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
.jpg "LOG114AIRGVR")
|
LOG114AIRGVRIC LOGARITHMIC 1 CIRCUIT 16VQFN |
2,269 |
|
Datasheet | - | 16-VQFN Exposed Pad | Tape & Reel (TR) | Active | Logarithmic | 1 | - | 5V/µs | 15 MHz | 5 MHz | 5 pA | 100 µV | 10mA | - | 4.8 V | 11 V | -5°C ~ 75°C | - | - | Surface Mount | 16-VQFN (4x4) |
|
INA128PAIC INST AMP 1 CIRCUIT 8DIP |
2,824 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | Instrumentation | 1 | - | 4V/µs | - | 1.3 MHz | 2 nA | 25 µV | 700µA | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
OPA4140AIPWRIC OPAMP JFET 4 CIRCUIT 14TSSOP |
4,133 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | J-FET | 4 | Rail-to-Rail | 20V/µs | 11 MHz | - | 0.5 pA | 30 µV | 1.8mA (x4 Channels) | 36 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
RCV420JPIC OPAMP GP 1 CIRCUIT 16DIP |
448 |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | - | 1.5V/µs | 150 kHz | - | - | 1 mV | 3mA | 10 mA | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 16-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
