Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4032IDGNRIC OPAMP VFB 2 CIRCUIT 8HVSSOP |
2,251 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Active | Voltage Feedback | 2 | - | 100V/µs | 120 MHz | 100 MHz | 3 µA | 500 µV | 8.5mA (x2 Channels) | 90 mA | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
PGA103UIC OPAMP PGA 1 CIRCUIT 8SOIC |
1,632 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Programmable Gain | 1 | - | 9V/µs | - | 1.5 MHz | 50 nA | 200 µV | 2.6mA | 25 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA211AIDRGTIC OPAMP GP 1 CIRCUIT 8SON |
1,094 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 27V/µs | 80 MHz | - | 60 nA | 30 µV | 3.6mA | 30 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SON (3x3) |
|
OPA211AIDGKTIC OPAMP GP 1 CIRCUIT 8VSSOP |
518 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 27V/µs | 80 MHz | - | 60 nA | 30 µV | 3.6mA | 30 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
THS4509RGTTIC OPAMP DIFF 1 CIRCUIT 16VQFN |
862 |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Differential | 1 | Differential | 6600V/µs | 3 GHz | 2 GHz | 8 µA | 1 mV | 37.7mA | 96 mA | 3 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 16-VQFN (3x3) |
|
|
INA121UIC INST AMP 1 CIRCUIT 8SOIC |
857 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Instrumentation | 1 | - | 0.7V/µs | - | 5 kHz | 4 pA | 200 µV | 450µA | 14 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA659IDBVTIC OPAMP JFET 1 CIRCUIT SOT23-5 |
468 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | J-FET | 1 | - | 2550V/µs | 350 MHz | 650 MHz | 10 pA | 1 mV | 32mA | 70 mA | 7 V | 13 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
OPA827AIDRIC OPAMP JFET 1 CIRCUIT 8SOIC |
3,535 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | - | 28V/µs | 22 MHz | - | 15 pA | 75 µV | 4.8mA | 30 mA | 8 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OPA4130UA/2K5IC OPAMP JFET 4 CIRCUIT 14SOIC |
1,070 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 4 | - | 2V/µs | 1 MHz | - | 5 pA | 200 µV | 530µA (x4 Channels) | 18 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
OPA333AMDBVREPIC OPAMP ZER-DRIFT 1CIRC SOT23-5 |
7,806 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 0.16V/µs | 350 kHz | - | 70 pA | 2 µV | 17µA | 5 mA | 1.8 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
