Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4130IDGNRIC OPAMP DIFF 1 CIRCUIT 8HVSSOP |
4,215 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Active | Differential | 1 | Differential | 52V/µs | 225 MHz | 150 MHz | 2 µA | 200 µV | 12.3mA | 85 mA | 4 V | 33 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
INA117KUIC OPAMP DIFF 1 CIRCUIT 8SOIC |
2,480 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Differential | 1 | - | 2.6V/µs | - | 200 kHz | - | 600 µV | 1.5mA | 20 mA | 10 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
.jpg "OPA569AIDWPR")
|
OPA569AIDWPRIC OPAMP GP 1 CIRCUIT 20HSOIC |
516 |
|
Datasheet | - | 20-SOIC (0.295", 7.50mm Width) Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 1.2V/µs | 1.2 MHz | - | 1 pA | 500 µV | 9mA | 2.4 A | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 20-HSOIC |
|
|
INA141UA/2K5IC INST AMP 1 CIRCUIT 8SOIC |
2,705 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 4V/µs | - | 1 MHz | 2 nA | 20 µV | 750µA | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA4820IPWTIC OPAMP VFB 4 CIRCUIT 14TSSOP |
900 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 4 | Differential | 240V/µs | 250 MHz | 650 MHz | 9 µA | 250 µV | 22.6mA | 85 mA | 4 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
THS4303RGTTIC OPAMP GP 1 CIRCUIT 16VQFN |
211 |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 1 | - | 5500V/µs | 1.8 GHz | 1.8 GHz | 7 µA | 1.5 mV | 34mA | 180 mA | 3 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-VQFN (3x3) |
|
INA129PAIC INST AMP 1 CIRCUIT 8DIP |
310 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 4V/µs | - | 1.3 MHz | 2 nA | 25 µV | 700µA | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
OPA818IDRGTIC OPAMP JFET 1 CIRCUIT 8SON |
277 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | J-FET | 1 | - | 1400V/µs | 2.7 GHz | 765 MHz | 25 pA | 1.25 mV | 26.5mA | 110 mA | 6 V | 13 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SON (3x3) |
|
LM6154BCM/NOPBIC OPAMP GP 4 CIRCUIT 14SOIC |
347 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 30V/µs | 80 MHz | - | 500 nA | 300 µV | 1.6mA (x4 Channels) | 16.9 mA | 2.7 V | 24 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
THS7001CPWPIC OPAMP PGA 1 CIRCUIT 20HTSSOP |
4,565 |
|
Datasheet | - | 20-PowerTSSOP (0.173", 4.40mm Width) | Bulk | Active | Programmable Gain | 1 | - | 85V/µs | 70 MHz | 100 MHz | 2.5 µA | 1 mV | 7mA | 95 mA | 9 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 20-HTSSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
