Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLE2084CDWIC OPAMP JFET 4 CIRCUIT 16SOIC |
453 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Active | J-FET | 4 | - | 45V/µs | 10 MHz | - | 20 pA | 500 µV | 6.3mA (x4 Channels) | 48 mA | 4.5 V | 38 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 16-SOIC |
|
PGA281AIPWIC OPAMP PGA 1 CIRCUIT 16TSSOP |
1,434 |
|
Datasheet | - | 16-TSSOP (0.173", 4.40mm Width) | Tube | Active | Zero-Drift | 1 | Rail-to-Rail | 1V/µs | 6 MHz | - | 300 pA | 5 µV | 2.4mA | - | 10 V | 36 V | -55°C ~ 140°C | - | - | Surface Mount | 16-TSSOP |
|
INA2126E/250IC INST AMP 2 CIRCUIT 16SSOP |
884 |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Instrumentation | 2 | - | 0.4V/µs | - | 200 kHz | 10 nA | 50 µV | 175µA (x2 Channels) | 10 mA | 2.7 V | 36 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 16-SSOP |
|
THS4505DRIC OPAMP DIFF 1 CIRCUIT 8SOIC |
5,195 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Differential | 1 | Differential | 1800V/µs | 210 MHz | 260 MHz | 4 µA | 4 mV | 16mA | - | 4.5 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA227UIC OPAMP GP 1 CIRCUIT 8SOIC |
2,061 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | - | 2.3V/µs | 8 MHz | - | 2.5 nA | 5 µV | 3.7mA | 45 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
INA121UAIC INST AMP 1 CIRCUIT 8SOIC |
291 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Instrumentation | 1 | - | 0.7V/µs | - | 5 kHz | 4 pA | 300 µV | 450µA | 14 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA2380AIDGKTIC TRANSIMPEDANCE 2 CIRC 8VSSOP |
1,233 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Transimpedance | 2 | - | 80V/µs | 90 MHz | - | 3 pA | 4 µV | 7.5mA (x2 Channels) | 150 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
INA125UAIC INST AMP 1 CIRCUIT 16SOIC |
644 |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tube | Active | Instrumentation | 1 | - | 0.2V/µs | - | 150 kHz | 10 nA | 50 µV | 460µA | 12 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
OPA855IDSGTIC OPAMP GP 1 CIRCUIT 8WSON |
1,770 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 1 | - | 2750V/µs | 8 GHz | 2.5 GHz | 12 µA | 200 µV | 17.8mA | 105 mA | 3.3 V | 5.25 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-WSON (2x2) |
|
OPA552FA/500IC OPAMP GP 1 CIRC DDPAK/TO263-7 |
635 |
|
Datasheet | - | TO-263-8, D2PAK (7 Leads + Tab), TO-263CA | Tape & Reel (TR) | Active | General Purpose | 1 | - | 24V/µs | 12 MHz | - | 20 pA | 1 mV | 7mA | 200 mA | 8 V | 60 V | -40°C ~ 125°C | - | - | Surface Mount | TO-263 (DDPAK-7) |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
