Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA455IDDAIC OPAMP GP 1 CIRC 8SOPWRPAD |
1,338 |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | - | - | 6.5 MHz | - | 30 pA | 200 µV | 3.2mA | 45 mA | 12 V | 150 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO PowerPad |
|
OPA4340UAIC CMOS 4 CIRCUIT 14SOIC |
671 |
|
Datasheet | microPOWER™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 4 | Rail-to-Rail | 6V/µs | 5.5 MHz | - | 0.2 pA | 150 µV | 750µA (x4 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
OPA277PIC OPAMP GP 1 CIRCUIT 8DIP |
386 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 0.8V/µs | 1 MHz | - | 500 pA | 10 µV | 790µA | 35 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
THS4211DIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
274 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 970V/µs | 350 MHz | 325 MHz | 7 µA | 3 mV | 19mA | 220 mA | 5 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LMP8358MA/NOPBIC OPAMP PGA 1 CIRCUIT 14SOIC |
253 |
|
Datasheet | LMP® | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | Zero-Drift | 1 | Rail-to-Rail | 11V/µs | 240 MHz | 930 kHz | 6 pA | 0.9 µV | 1.9mA | 41 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
THS4541QWRGTRQ1IC OPAMP DIFF 1 CIRCUIT 16VQFN |
1,481 |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Differential | 1 | Differential, Rail-to-Rail | 1500V/µs | 850 MHz | 620 MHz | 10 µA | 100 µV | 10.1mA | 100 mA | 2.7 V | 5.4 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 16-VQFN (3x3) |
|
|
LMH6626MA/NOPBIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
297 |
|
Datasheet | LMH® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Voltage Feedback | 2 | - | 400V/µs | 1.5 GHz | 95 MHz | 13 µA | 100 µV | 12mA (x2 Channels) | 80 mA | 5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
_4040251^B.jpg "OPA453TA")
|
OPA453TAIC OPAMP GP 1 CIRCUIT TO220-7 |
446 |
|
Datasheet | - | TO-220-7 | Tube | Active | General Purpose | 1 | - | 38V/µs | 7.5 MHz | - | 7 pA | 1 mV | 5.5mA | - | 20 V | 80 V | -40°C ~ 125°C | - | - | Through Hole | TO-220-7 |
_4040233^C.jpg "OPA453TA-1")
|
OPA453TA-1IC OPAMP GP 1 CIRCUIT TO220-7 |
131 |
|
Datasheet | - | TO-220-7 Formed Leads | Tube | Active | General Purpose | 1 | - | 38V/µs | 7.5 MHz | - | 7 pA | 1 mV | 5.5mA | 50 mA | 20 V | 80 V | -40°C ~ 125°C | - | - | Through Hole | TO-220-7 |
.jpg "OPA564AIDWP")
|
OPA564AIDWPIC OPAMP GP 1 CIRCUIT 20HSOIC |
170 |
|
Datasheet | - | 20-SOIC (0.295", 7.50mm Width) Exposed Pad | Tube | Active | General Purpose | 1 | - | 40V/µs | 17 MHz | - | 10 pA | 2 mV | 39mA | 1.5 A | 7 V | 24 V | -40°C ~ 85°C | - | - | Surface Mount | 20-HSOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
