Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA4134UAIC AUDIO 4 CIRCUIT 14SOIC |
1,070 |
|
Datasheet | SoundPlus™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | Audio | 4 | - | 20V/µs | 8 MHz | - | 5 pA | 500 µV | 4mA (x4 Channels) | 35 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
OPA228UIC OPAMP GP 1 CIRCUIT 8SOIC |
330 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | - | 11V/µs | 33 MHz | - | 2.5 nA | 5 µV | 3.7mA | 45 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA2690I-14DIC OPAMP VFB 2 CIRCUIT 14SOIC |
194 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 2 | - | 1800V/µs | 300 MHz | 500 MHz | 5 µA | 1 mV | 11mA (x2 Channels) | 190 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
OPA2735AIDIC OPAMP ZERO-DRIFT 2 CIRC 8SOIC |
319 |
|
Datasheet | Zero-Drift | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Zero-Drift | 2 | Differential, Rail-to-Rail | 1.5V/µs | 1.6 MHz | - | 100 pA | 1 µV | 600µA (x2 Channels) | 20 mA | 2.7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA2227PAIC OPAMP GP 2 CIRCUIT 8DIP |
300 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | - | 2.3V/µs | 8 MHz | - | 2.5 nA | 10 µV | 3.7mA (x2 Channels) | 45 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
OPA2140AIDRGRDUAL-CHANNEL, 11-MHZ, LOW-NOISE |
2,608 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | J-FET | 2 | Push-Pull, Rail-to-Rail | 20V/µs | 11 MHz | - | 0.5 pA | 30 µV | 1.8mA (x2 Channels) | 36 mA | 4.5 V | 36 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-WSON (3x3) |
|
OPA564AIDWDRIC OPAMP GP 1 CIRCUIT 20HSOP |
764 |
|
Datasheet | - | 20-SOIC (0.295", 7.50mm Width) Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 1 | - | 40V/µs | 17 MHz | - | 10 pA | 2 mV | 39mA | 1.5 A | 7 V | 24 V | -40°C ~ 85°C | - | - | Surface Mount | 20-HSOP |
|
|
OPA4191IDIC CMOS 4 CIRCUIT 14SOIC |
243 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 4 | Rail-to-Rail | 5V/µs | 2.5 MHz | - | 5 pA | 5 µV | 140µA (x4 Channels) | 65 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
OPA4191IRUMTIC CMOS 4 CIRCUIT 16WQFN |
211 |
|
Datasheet | - | 16-WQFN Exposed Pad | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 7.5V/µs | 2.5 MHz | - | 5 pA | 5 µV | 140µA (x4 Channels) | 65 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 16-WQFN (4x4) |
|
LMH6626MM/NOPBIC OPAMP VFB 2 CIRCUIT 8VSSOP |
549 |
|
Datasheet | LMH® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | - | 400V/µs | 1.5 GHz | 95 MHz | 13 µA | 100 µV | 12mA (x2 Channels) | 80 mA | 5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
