Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
INA819IDIC INST AMP 1 CIRCUIT 8SOIC |
773 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Instrumentation | 1 | - | 0.9V/µs | - | 2 MHz | 150 pA | 10 µV | 350µA | 20 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
BUF802IRGTRWIDE-BANDWIDTH, 2.3-NV/HZ, JFET |
2,951 |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | J-FET | 1 | Push-Pull | 7000V/µs | - | 3.1 GHz | 7 pA | 600 mV | 34mA | - | 9 V | 13 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-VQFN (3x3) |
|
OPA2891DRDual-channel 180MHz 0.95nV Hz |
2,465 |
|
Datasheet | OPAx891 | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 2 | Push-Pull | 105V/µs | 180 MHz | 135 MHz | 9 µA | 200 µV | 7.5mA (x2 Channels) | 200 mA | 9 V | 36 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
THS4520RGTRIC OPAMP DIFF 1 CIRCUIT 16VQFN |
4,341 |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Differential | 1 | Differential, Rail-to-Rail | 570V/µs | 1.2 GHz | 620 MHz | 6.5 µA | 250 µV | 14.2mA | - | 3 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 16-VQFN (3x3) |
|
|
OPA891DGNRIC OP AMP 1 CIRCUIT 8-HVSSOP |
2,815 |
|
Datasheet | - | 8-PowerTSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Standard | 1 | Push-Pull | 105V/µs | 180 MHz | 135 MHz | 9 µA | 200 µV | 7.5mA | 200 mA | 9 V | 36 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-HVSSOP |
|
|
OPA4206ADRINPUT-OVERVOLTAGE-PROTECTED, LOW |
2,805 |
|
Datasheet | e-trim™ | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 4 | Push-Pull, Rail-to-Rail | 4V/µs | 3.6 MHz | - | 100 pA | 4 µV | 220µA (x4 Channels) | 25 mA | 4.5 V | 36 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOIC |
|
LMV844MA/NOPBIC OPAMP GP 4 CIRCUIT 14SOIC |
327 |
|
Datasheet | LMV® | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 2.5V/µs | 4.5 MHz | - | 4 pA | 50 µV | 1.03mA (x4 Channels) | 37 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
OPA2380AIDGKRIC TRANSIMPEDANCE 2 CIRC 8VSSOP |
3,874 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Transimpedance | 2 | - | 80V/µs | 90 MHz | - | 3 pA | 4 µV | 7.5mA (x2 Channels) | 150 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
|
OPA690IDIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
335 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 1800V/µs | 300 MHz | 500 MHz | 3 µA | 1 mV | 5.5mA | 190 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LMH6505MAX/NOPBIC VARIABLE GAIN 1 CIRCUIT 8SOIC |
7,334 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Variable Gain | 1 | - | 1500V/µs | - | 150 MHz | 600 nA | - | 11mA | 80 mA | 7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
