Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4082CDIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
487 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 2 | - | 230V/µs | - | 175 MHz | 1.2 µA | 1 mV | 3.4mA (x2 Channels) | 85 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LMH6553MR/NOPBIC OPAMP CFA 1 CIRC 8SOPWRPAD |
166 |
|
Datasheet | LMH®, PowerWise® | 8-PowerSOIC (0.154", 3.90mm Width) | Tube | Active | Current Feedback | 1 | Differential | 2300V/µs | - | 900 MHz | 50 µA | - | 29.1mA | 120 mA | 4.5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO PowerPad |
|
OPA817DTKR800-MHZ, HIGH-PRECISION UNITY-GA |
1,290 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | J-FET | 1 | - | 1000V/µs | 400 MHz | 40 MHz | 2 pA | 50 µV | 23.5mA | 100 mA | 6 V | 12.6 V | -40°C ~ 105°C (TA) | - | - | Surface Mount | 8-WSON (3x3) |
|
|
OPA860IDIC OPAMP TRANSCOND 1 CIRC 8SOIC |
225 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Transconductance | 1 | - | 3500V/µs | 470 MHz | - | 1 µA | 3 mV | 11.2mA | 15 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA2132PAIC OPAMP JFET 2 CIRCUIT 8DIP |
147 |
|
Datasheet | OPAx132 | 8-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 2 | - | 20V/µs | 8 MHz | - | 5 pA | 500 µV | 4mA (x2 Channels) | 40 mA | 5 V | 36 V | -40°C ~ 85°C (TA) | - | - | Through Hole | 8-PDIP |
|
OPA659IDRBTIC OPAMP JFET 1 CIRCUIT 8SON |
309 |
|
Datasheet | - | 8-VDFN Exposed Pad | Tape & Reel (TR) | Active | J-FET | 1 | - | 2550V/µs | 350 MHz | 650 MHz | 10 pA | 1 mV | 32mA | 70 mA | 7 V | 13 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SON (3x3) |
|
THS4012IDGNRIC OPAMP VFB 2 CIRCUIT 8HVSSOP |
1,465 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Active | Voltage Feedback | 2 | - | 310V/µs | 290 MHz | 290 MHz | 2 µA | 1 mV | 7.8mA | 110 mA | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
|
LM7171BIN/NOPBIC VOLTAGE FEEDBACK 1 CIRC 8DIP |
788 |
|
Datasheet | VIP™ III | 8-DIP (0.300", 7.62mm) | Tube | Active | Voltage Feedback | 1 | - | 4100V/µs | 200 MHz | 220 MHz | 2.7 µA | 200 µV | 6.5mA | 118 mA | 5.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
THS4011CDGNRIC OPAMP VFB 1 CIRCUIT 8HVSSOP |
356 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 310V/µs | 290 MHz | 290 MHz | 2 µA | 1 mV | 7.8mA | - | 9 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
LM6144BIN/NOPBIC OPAMP GP 4 CIRCUIT 14DIP |
1,153 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 25V/µs | 18 MHz | - | 174 nA | 1.3 mV | 750µA (x4 Channels) | 22 mA | 1.8 V | 24 V | -40°C ~ 85°C (TA) | - | - | Through Hole | 14-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
