Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AMC1200BDWVIC OPAMP ISOLATION 1 CIRC 8SOIC |
151 |
|
Datasheet | - | 8-SOIC (0.295", 7.50mm Width) | Tube | Active | Isolation | 1 | Differential | - | - | 100 kHz | - | 200 µV | 5.4mA | - | 2.7 V | 5.5 V | -40°C ~ 105°C | - | - | Surface Mount | 8-SOIC |
|
OPA2704UA/2K5IC CMOS 2 CIRCUIT 8SOIC |
1,712 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 3V/µs | 3 MHz | - | 1 pA | 160 µV | 160µA (x2 Channels) | 10 mA | 4 V | 12 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
INA188IDIC OPAMP ZERO-DRIFT 1 CIRC 8SOIC |
933 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Zero-Drift | 1 | Rail-to-Rail | 0.9V/µs | - | 600 kHz | 850 pA | 25 µV | 1.4mA | - | 4 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
THS4081IDIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
4,512 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 230V/µs | - | 175 MHz | 1.2 µA | 1 mV | 3.4mA | - | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
INA2126UIC INST AMP 2 CIRCUIT 16SOIC |
446 |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tube | Active | Instrumentation | 2 | - | 0.4V/µs | - | 200 kHz | 10 nA | 100 µV | 175µA (x2 Channels) | 10 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
OPA2810IDGKTIC OPAMP VFB 2 CIRCUIT 8VSSOP |
3,416 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | Rail-to-Rail | 243V/µs | 70 MHz | 105 MHz | 2 pA | 100 µV | 3.7mA (x2 Channels) | 108 mA | 4.75 V | 27 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-VSSOP |
|
|
OPA2810IDTIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
983 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | Rail-to-Rail | 243V/µs | 70 MHz | 105 MHz | 2 pA | 100 µV | 3.7mA (x2 Channels) | 108 mA | 4.75 V | 27 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
OPA2810IDCNTIC OPAMP VFB 2 CIRCUIT SOT23-8 |
638 |
|
Datasheet | - | SOT-23-8 | Tape & Reel (TR) | Active | Voltage Feedback | 2 | Rail-to-Rail | 243V/µs | 70 MHz | 105 MHz | 2 pA | 100 µV | 3.7mA (x2 Channels) | 108 mA | 4.75 V | 27 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SOT-23-8 |
|
|
LMH6624MA/NOPBIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
309 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Voltage Feedback | 1 | - | 400V/µs | 1.5 GHz | 95 MHz | 13 µA | 100 µV | 12mA | 100 mA | 5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LMH6629MFE/NOPBIC OPAMP VFB 1 CIRCUIT SOT23-5 |
282 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 1600V/µs | - | 1 GHz | 15 µA | 150 µV | 15.5mA | 250 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
