Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA4189IDRQUAD, 14-MHZ, MUX-FRIENDLY, ZERO |
2,330 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 20V/µs | 14 MHz | 8 MHz | 70 pA | 800 µV | 1.3mA (x4 Channels) | 65 mA | 4.5 V | 36 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOIC |
|
LMP7704MT/NOPBIC OPAMP GP 4 CIRCUIT 14TSSOP |
1,417 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 1.1V/µs | 2.5 MHz | - | 0.2 pA | 37 µV | 3.2mA (x4 Channels) | 86 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
LMH6321MRX/NOPBIC BUFFER 1 CIRCUIT 8SOPWRPAD |
1,030 |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Buffer | 1 | - | 2900V/µs | - | 110 MHz | 2 µA | 4 mV | 14.9mA | 295 mA | 5 V | 32 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO PowerPad |
|
OPA4336EA/250IC CMOS 4 CIRCUIT 16SSOP |
720 |
|
Datasheet | MicroAmplifier™ | 16-SSOP (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 0.03V/µs | 100 kHz | - | 1 pA | 60 µV | 20µA (x4 Channels) | 5 mA | 2.3 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SSOP |
|
|
OPA4141AIDIC OPAMP JFET 4 CIRCUIT 14SOIC |
621 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 4 | Rail-to-Rail | 20V/µs | 10 MHz | - | 2 pA | 1 mV | 1.8mA (x4 Channels) | 36 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
|
OPA4141AIPWIC OPAMP JFET 4 CIRCUIT 14TSSOP |
314 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tube | Active | J-FET | 4 | Rail-to-Rail | 20V/µs | 10 MHz | - | 2 pA | 1 mV | 1.8mA (x4 Channels) | 36 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
AMC1300DWVRIC ISOLATION 8SOIC |
285 |
|
Datasheet | - | 8-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | Isolation | 1 | - | - | 1 MHz | - | 30 µA | 10 µV | 5.9mA | 14 mA | 3 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OPA691IDIC OPAMP CFA 1 CIRCUIT 8SOIC |
2,364 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 1 | - | 2100V/µs | 2 GHz | 280 MHz | 15 µA | 500 µV | 5.1mA | 190 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
AMC1200SDUBIC OPAMP ISOLATION 1 CIRC 8SOP |
723 |
|
Datasheet | - | 8-SMD, Gull Wing | Bulk | Active | Isolation | 1 | Differential | - | - | 100 kHz | - | 200 µV | 5.4mA | 20 mA | 2.7 V | 5.5 V | -40°C ~ 105°C | - | - | Surface Mount | 8-SOP |
|
|
AMC1200BDUBIC OPAMP ISOLATION 1 CIRC 8SOP |
216 |
|
Datasheet | - | 8-SMD, Gull Wing | Tube | Active | Isolation | 1 | Differential | - | - | 100 kHz | - | 200 µV | 5.4mA | 20 mA | 2.7 V | 5.5 V | -40°C ~ 105°C | - | - | Surface Mount | 8-SOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
