Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LM6142BIMLM6142 DUAL HIGH SPEED/LOW POWER |
310 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 25V/µs | 18 MHz | - | 174 nA | 1.3 mV | 750µA (x2 Channels) | 24 mA | 1.8 V | 24 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
LMH6553MRX/NOPBIC OPAMP CFA 1 CIRC 8SOPWRPAD |
4,938 |
|
Datasheet | LMH®, PowerWise® | 8-PowerSOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 1 | Differential | 2300V/µs | - | 900 MHz | 50 µA | - | 29.1mA | 120 mA | 4.5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO PowerPad |
|
LMH6552SD/NOPBLMH6552 1.5 GHZ FULLY DIFFERENTI |
1,044 |
|
Datasheet | LMH®, PowerWise® | 8-WFDFN Exposed Pad | Bulk | Active | Current Feedback | 1 | Differential | 3800V/µs | - | 1.5 GHz | 60 µA | 1.5 mV | 22.5mA | 80 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-WSON (2.5x3) |
|
LMH6553SD/NOPBIC OPAMP CFA 1 CIRCUIT 8WSON |
286 |
|
Datasheet | LMH®, PowerWise® | 8-WFDFN Exposed Pad | Bulk | Active | Current Feedback | 1 | Differential | 2300V/µs | - | 900 MHz | 50 µA | - | 29.1mA | 120 mA | 4.5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-WSON (2.5x3) |
|
LM7372IMA/NOPBLM7372 HIGH SPEED, HIGH OUTPUT C |
644 |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 2 | - | 3000V/µs | 120 MHz | 220 MHz | 2.7 µA | 2 mV | 13mA (x2 Channels) | 260 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
LMH6732MF/NOPBLMH6732 HIGH SPEED OP AMP WITH A |
386 |
|
Datasheet | - | SOT-23-6 | Bulk | Active | Current Feedback | 1 | - | 2700V/µs | - | 540 MHz | 2 µA | 3 mV | 9mA | 115 mA | 9 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
|
LMH6624MALMH6624 SINGLE ULTRA LOW N |
19,270 |
|
Datasheet | LMH® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 400V/µs | 1.5 GHz | 95 MHz | 13 µA | 100 µV | 12mA | 100 mA | 5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LMH6503MAX/NOPBLMH6503 WIDEBAND, LOW POWER, LIN |
43,118 |
|
Datasheet | LMH® | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | Variable Gain | 1 | - | 1800V/µs | - | 135 MHz | 11 µA | - | 37mA | 90 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
LMC6084AIM/NOPBLMC6084 PRECISION CMOS QUAD OPER |
509 |
|
Datasheet | LMC® | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 4 | Push-Pull, Rail-to-Rail | 1.5V/µs | 1.3 MHz | - | 0.01 pA | 150 µV | 2.2mA (x4 Channels) | 34 mA | 4.5 V | 15.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
LMH6502MAX/NOPBIC VARIABLE GAIN 1 CIRC 14SOIC |
4,824 |
|
Datasheet | LMH® | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | Variable Gain | 1 | - | 1800V/µs | - | 130 MHz | 9 µA | - | 27mA | 90 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
