Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMH6639MA/NOPBLMH6639 190MHZ RAIL-TO-RAIL OUTP |
675 |
|
Datasheet | VIP10™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | Rail-to-Rail | 200V/µs | 90 MHz | 228 MHz | 1.4 nA | 1.3 mV | 4.18mA | 112 mA | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LMH6645MAX/NOPBLMH6645 - SINGLE CHANNEL, RAIL-T |
1,288 |
|
Datasheet | VIP10™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | Push-Pull, Rail-to-Rail | 22V/µs | - | 55 MHz | 650 nA | 1 mV | 725µA | 20 mA | 2.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LMH6654MAX/NOPBLMH6654 SINGLE CHANNEL, LOW POWE |
2,500 |
|
Datasheet | LMH® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 200V/µs | 260 MHz | - | 5 µA | 1 mV | 4.5mA | 120 mA | 2.5 V | 6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LF353MLF353-N WIDE BANDWIDTH DUAL JFET |
1,690 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | J-FET | 2 | - | 13V/µs | 4 MHz | - | 50 pA | 5 mV | 3.6mA (x2 Channels) | - | 10 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LMV792MM/NOPBLMV792 DUAL 17 MHZ, LOW NOISE, C |
243 |
|
Datasheet | LMV® | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 11.5V/µs | 17 MHz | - | 0.1 pA | 100 µV | 1.3mA (x2 Channels) | 60 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 10-VSSOP |
|
|
LMC662AIM/NOPBLMC662 DUAL 15.5V, 1.4MHZ, IMPRO |
1,740 |
|
Datasheet | LMC® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 2 | Push-Pull, Rail-to-Rail | 1.1V/µs | 1.4 MHz | - | 0.002 pA | 1 mV | 750µA (x2 Channels) | 40 mA | 4.75 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 8-SOIC |
|
LMV118MFX/NOPBIC OPAMP VFB 1 CIRCUIT SOT23-6 |
46,928 |
|
Datasheet | - | SOT-23-6 | Bulk | Active | Voltage Feedback | 1 | Push-Pull, Rail-to-Rail | 35V/µs | - | 45 MHz | 400 nA | 1 mV | 600µA | 20 mA | 2.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
LMH6682MM/NOPBIC OPAMP VFB 2 CIRCUIT 8VSSOP |
1,675 |
|
Datasheet | LMH® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | Voltage Feedback | 2 | - | 940V/µs | 120 MHz | 190 MHz | 5 µA | 1 mV | 6.5mA (x2 Channels) | 85 mA | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
LMV654MT/NOPBLMV654 QUAD 12 MHZ, LOW VOLTAGE, |
997 |
|
Datasheet | LMV® | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 3V/µs | 12 MHz | - | 80 pA | 100 mV | 122µA (x4 Channels) | 25 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
LMV118MF/NOPBLMV118 LOW VOLTAGE, 45MHZ, RAIL- |
912 |
|
Datasheet | - | SOT-23-6 | Bulk | Active | Voltage Feedback | 1 | Push-Pull, Rail-to-Rail | 35V/µs | - | 45 MHz | 400 nA | 1 mV | 600µA | 20 mA | 2.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
