Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMH6559MFLMH6559 1750MHZ, HIGH-SPEED, CLO |
600 |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Active | Buffer | 1 | - | 4580V/µs | - | 1.75 GHz | 3 µA | 3 mV | 10mA | 74 mA | 3 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
LMP2234AMT/NOPBIC OPAMP GP 4 CIRCUIT 14TSSOP |
3,870 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | General Purpose | 4 | Differential, Rail-to-Rail | 0.048V/µs | 130 kHz | - | 0.02 pA | 10 µV | 36µA (x4 Channels) | 30 mA | 1.6 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
LMC6494AEMX/NOPBIC CMOS 4 CIRCUIT 14SOIC |
8,750 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 4 | Rail-to-Rail | 1.3V/µs | 1.5 MHz | - | 0.15 pA | 110 µV | 2.6mA (x4 Channels) | 30 mA | 2.5 V | 15.5 V | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 14-SOIC |
|
OPA683IDBVTIC OPAMP CFA 1 CIRCUIT SOT23-6 |
2,150 |
|
Datasheet | - | SOT-23-6 | Bulk | Active | Current Feedback | 1 | - | 540V/µs | 150 MHz | 200 MHz | 3 µA | 1.5 mV | 940µA | 150 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
LMH6672MA/NOPBLMH6672 DUAL, HIGH OUTPUT CURREN |
1,020 |
|
Datasheet | LMH® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 2 | - | 135V/µs | - | 90 MHz | 8 µA | 100 µV | 7.2mA (x2 Channels) | 525 mA | 5 V | 12 V | -40°C ~ 150°C | - | - | Surface Mount | 8-SOIC |
|
|
LMH6628MA/NOPBLMH6628 DUAL WIDEBAND, LOW NOISE |
977 |
|
Datasheet | LMV® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 2 | - | 550V/µs | 200 MHz | 300 MHz | 700 nA | 500 µV | 9mA (x2 Channels) | 85 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LM6142BINIC OPAMP GP 2 CIRCUIT 8DIP |
260 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 25V/µs | 18 MHz | - | 174 nA | 1.3 mV | 750µA (x2 Channels) | 24 mA | 1.8 V | 24 V | -40°C ~ 85°C (TA) | - | - | Through Hole | 8-PDIP |
|
|
LMH6702MALMH6702 1.7 GHZ, ULTRA LOW DISTO |
14,734 |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
LMH6732MFX/NOPBIC OPAMP CFA 1 CIRCUIT SOT23-6 |
3,000 |
|
Datasheet | - | SOT-23-6 | Bulk | Active | Current Feedback | 1 | - | 2700V/µs | - | 540 MHz | 2 µA | 3 mV | 9mA | 115 mA | 9 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
|
LMH6550MA/NOPBLMH6550 400MHZ, DIFFERENTIAL, HI |
2,887 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | Differential | 3000V/µs | - | 400 MHz | 8 µA | 1 mV | 20mA | 75 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
