Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMH6657MF/NOPBLMH6657 270MHZ SINGLE SUPPLY, SI |
1,300 |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Active | Voltage Feedback | 1 | - | 700V/µs | 140 MHz | 270 MHz | 5 µA | 1 mV | 6.5mA | 110 mA | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
LMH6657MG/NOPBLMH6657 270MHZ SINGLE SUPPLY, SI |
949 |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Bulk | Active | Voltage Feedback | 1 | - | 700V/µs | 140 MHz | 270 MHz | 5 µA | 1 mV | 6.5mA | 110 mA | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
|
LMH6645MA/NOPBLMH6645 - SINGLE CHANNEL, RAIL-T |
345 |
|
Datasheet | VIP10™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | Push-Pull, Rail-to-Rail | 22V/µs | - | 55 MHz | 650 nA | 1 mV | 725µA | 20 mA | 2.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LMC6442IM/NOPBLMC6442 DUAL MICROPOWER RAIL-TO- |
326 |
|
Datasheet | LMC® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.0041V/µs | 10.5 kHz | - | 0.005 pA | 1.5 mV | 1.9µA (x2 Channels) | 2.1 mA | 1.8 V | 11 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 8-SOIC |
|
ONET4291PARGVRIC LIMITING 1 CIRCUIT 16VQFN |
2,348 |
|
Datasheet | - | 16-VQFN Exposed Pad | Bulk | Active | Limiting | 1 | Differential | - | - | 4.5 GHz | - | - | 50mA | - | 2.9 V | 3.6 V | -40°C ~ 85°C | - | - | Surface Mount | 16-VQFN (4x4) |
|
|
LMH6643MALMH6643 DUAL CHANNEL, LOW POWER, |
1,955 |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
LMV854MTX/NOPBLMV854 QUAD 8 MHZ LOW POWER CMOS |
1,488 |
|
Datasheet | LMV® | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | CMOS | 4 | Rail-to-Rail | 4.5V/µs | 8 MHz | - | 0.1 pA | 260 µV | 1.59mA (x4 Channels) | 65 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
|
LMV2011MA/NOPBLMV2011 HIGH PRECISION, RAIL-TO- |
5,300 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 4V/µs | 3 MHz | - | 3 pA | 0.12 µV | 930µA | 17 mA | 2.7 V | 5.25 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LMP2232AMMX/NOPBIC OPAMP GP 2 CIRCUIT 8VSSOP |
3,300 |
|
Datasheet | LMP® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | General Purpose | 2 | Differential, Rail-to-Rail | 0.048V/µs | 130 kHz | - | 0.02 pA | 10 µV | 19µA (x2 Channels) | 30 mA | 1.6 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
|
LMH6724MAX/NOPBLMH6724 DUAL CHANNEL, 370 MHZ, 1 |
1,660 |
|
Datasheet | LMH® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 2 | - | 600V/µs | - | 370 MHz | 2 µA | 1 mV | 1mA (x2 Channels) | 110 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
