Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LPV324MIC OPAMP GP 4 CIRCUIT 14SOIC |
624 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 0.1V/µs | 152 kHz | - | 2 nA | 1.5 mV | 28µA (x4 Channels) | 16 mA | 2.7 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
LMV358M-NSIC OPAMP GP 2 CIRCUIT 8MSOP |
650 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 1V/µs | 1 MHz | - | 15 nA | 1.7 mV | 190µA (x2 Channels) | 90 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
LMV344MTXIC CMOS 4 CIRCUIT 14TSSOP |
932 |
|
Datasheet | LMV® | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | CMOS | 4 | Rail-to-Rail | 1V/µs | 1 MHz | - | 0.02 pA | 700 µV | 107µA (x4 Channels) | 113 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
LMV118MFIC OPAMP VFB 1 CIRCUIT SOT23-6 |
800 |
|
Datasheet | LMV® | SOT-23-6 | Bulk | Active | Voltage Feedback | 1 | Push-Pull, Rail-to-Rail | 35V/µs | - | 45 MHz | 400 nA | 1 mV | 600µA | 20 mA | 2.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
|
LMV722MMIC OPAMP GP 2 CIRCUIT 8VSSOP |
510 |
|
Datasheet | LMV® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 5.25V/µs | 10 MHz | - | 260 nA | 80 µV | 2.01mA (x2 Channels) | 52.6 mA | 2.2 V | 5.5 V | -40°C ~ 85°C (TJ) | Automotive | AEC-Q100 | Surface Mount | 8-VSSOP |
|
LMH6645MFIC OPAMP VFB 1 CIRCUIT SOT23-5 |
500 |
|
Datasheet | LMH® | SC-74A, SOT-753 | Bulk | Active | Voltage Feedback | 1 | Push-Pull, Rail-to-Rail | 22V/µs | 55 MHz | 55 MHz | 650 nA | 1 mV | 725µA | 20 mA | 2.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
LPC660AMDIC CMOS 4 CIRCUIT 14CERDIP |
1,635 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | CMOS | 4 | Push-Pull, Rail-to-Rail | 0.11V/µs | 350 kHz | - | 0.002 pA | 1 mV | 160µA (x4 Channels) | 40 mA | 4.75 V | 15.5 V | -55°C ~ 125°C | - | - | Through Hole | 14-CERDIP |
|
LF412MHIC OPAMP JFET 2 CIRCUIT TO99-8 |
3,965 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 2 | - | 15V/µs | 4 MHz | - | 50 pA | 1 mV | 3.6mA (x2 Channels) | - | 10 V | 40 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
LM10CHIC OPAMP GP 1 CIRCUIT TO99-8 |
3,789 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | - | - | - | 12 nA | 500 µV | 300µA | - | 1.1 V | 40 V | 0°C ~ 70°C | - | - | Through Hole | TO-99-8 |
|
|
JM38510/11905BGAIC OPAMP JFET 2 CIRCUIT 10CFP |
2,554 |
|
Datasheet | - | 10-CFlatPack | Bulk | Active | J-FET | 2 | - | 13V/µs | 3 MHz | - | 50 pA | 500 µV | 3.6mA (x2 Channels) | - | 7 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 10-CFP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
