Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLC1079CNSRG4IC CMOS 4 CIRCUIT 14SO |
3,855 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.209", 5.30mm Width) | Tape & Reel (TR) | Obsolete | CMOS | 4 | - | 0.032V/µs | 110 kHz | - | 1 pA | 180 µV | 29µA (x4 Channels) | 30 mA | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
|
TLC254CDG4IC CMOS 4 CIRCUIT 14SOIC |
4,084 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | CMOS | 4 | Open Drain | 4.5V/µs | 2.2 MHz | - | 0.6 pA | 1.1 mV | 2.7mA (x4 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
|
TLC25L4CDG4IC CMOS 4 CIRCUIT 14SOIC |
2,735 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | CMOS | 4 | Single-Ended | 0.04V/µs | 110 kHz | - | 0.6 pA | 1.1 mV | 2.7mA (x4 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
LME49722MAX/NOPBIC AUDIO 2 CIRCUIT 8SOIC |
4,424 |
|
Datasheet | LME® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Audio | 2 | - | 22V/µs | 55 MHz | - | 53 nA | 20 µV | 12.3mA (x2 Channels) | 28 mA | 5 V | 36 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
OPA2336PAIC CMOS 2 CIRCUIT 8DIP |
4,915 |
|
Datasheet | MicroAmplifier™ | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 0.03V/µs | 100 kHz | - | 1 pA | 60 µV | 20µA (x2 Channels) | 5 mA | 2.3 V | 5.5 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
TLE2022IPE4DUAL PRECISION LOW-POWER SINGLE |
2,305 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | Push-Pull | 0.65V/µs | 2.8 MHz | - | 35 nA | 150 µV | 550µA | 30 mA | 4 V | 40 V | -40°C ~ 85°C | Automotive | AEC-Q100 | Through Hole | 8-PDIP |
|
|
TL054AIDRE4IC OPAMP JFET 4 CIRCUIT 14SOIC |
2,292 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | J-FET | 4 | - | 17.8V/µs | 2.7 MHz | - | 30 pA | 500 µV | 8.4mA (x4 Channels) | 80 mA | 10 V | 30 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
|
OPA847IDG4IC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
1,415 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | - | 950V/µs | 3.9 GHz | - | 19 µA | 100 µV | 18.1mA | 100 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LMC6042AIMIC CMOS 2 CIRCUIT 8SOIC |
2,263 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 2 | Push-Pull, Rail-to-Rail | 0.02V/µs | 100 kHz | - | 0.002 pA | 1 mV | 26µA (x2 Channels) | 40 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 8-SOIC |
|
OPA561PWP/2KG4IC OPAMP GP 1 CIRCUIT 20HTSSOP |
1,679 |
|
Datasheet | - | 20-PowerTSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 1 | - | 50V/µs | 17 MHz | - | 10 pA | 1 mV | 50mA | 1.2 A | 7 V | 15 V | -40°C ~ 125°C | - | - | Surface Mount | 20-HTSSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
