Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA4684IPWRG4IC OPAMP CFA 4 CIRCUIT 14TSSOP |
3,634 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 4 | - | 780V/µs | 120 MHz | 95 MHz | 5 µA | 1.5 mV | 1.7mA (x4 Channels) | 160 mA | 2.8 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
VCA821IDGSRIC VARIABLE GAIN 1 CIRC 10VSSOP |
1,111 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | Variable Gain | 1 | - | 2500V/µs | - | 710 MHz | 19 µA | 4 mV | 34mA | 90 mA | 7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 10-VSSOP |
|
|
VCA824IDGSRIC VARIABLE GAIN 1 CIRC 10VSSOP |
1,655 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | Variable Gain | 1 | - | 2500V/µs | - | 710 MHz | 19 µA | 4 mV | 36.5mA | 90 mA | 8 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 10-VSSOP |
|
LM7301IM5IC OPAMP GP 1 CIRCUIT SOT23-5 |
1,175 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.25V/µs | 4 MHz | - | 103 nA | 40 µV | 720µA | 11.7 mA | 1.8 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
V62/11610-01XEENHANCED PRODUCT 2.2V, 50MHZ, LO |
1,239 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Standard | 1 | Push-Pull, Rail-to-Rail | 25V/µs | 50 MHz | - | 0.2 pA | 100 µV | 4.6mA | 65 mA | 2.2 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
LM308AH/NOPBIC OPAMP GP 1 CIRCUIT TO99-8 |
4,171 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Obsolete | General Purpose | 1 | - | - | - | - | 1.5 nA | 2 mV | 300µA | - | 4 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | TO-99-8 |
|
|
LM308H/NOPBIC OPAMP GP 1 CIRCUIT TO99-8 |
4,947 |
|
Datasheet | - | TO-99-8 Metal Can | Box | Obsolete | General Purpose | 1 | - | - | - | - | 1.5 nA | 2 mV | 300µA | - | 4 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | TO-99-8 |
|
OPA4364AQDRQ1IC CMOS 4 CIRCUIT 14SOIC |
4,263 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 5V/µs | 7 MHz | - | 1 pA | 1 mV | 1.1mA (x4 Channels) | 85 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-SOIC |
|
OPA277UG4IC OPAMP GP 1 CIRCUIT 8SOIC |
3,473 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 0.8V/µs | 1 MHz | - | 500 pA | 10 µV | 790µA | 35 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
TLE2024CNE4QUAD PRECISION LOW-POWER SINGLE |
1,731 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | Push-Pull | 0.5V/µs | 2.8 MHz | - | 50 nA | - | 1.05mA | 40 mA | 4 V | 40 V | 0°C ~ 70°C | Automotive | AEC-Q100 | Through Hole | 14-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
