Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMH6657MGIC OPAMP VFB 1 CIRCUIT SC70-5 |
2,279 |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Obsolete | Voltage Feedback | 1 | - | 700V/µs | 140 MHz | 270 MHz | 5 µA | 1 mV | 6.5mA | 110 mA | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
|
TLC25L4ACNG4IC CMOS 4 CIRCUIT 14DIP |
2,527 |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 4 | Single-Ended | 0.04V/µs | 110 kHz | - | 0.6 pA | 900 µV | 2.7mA (x4 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
THS3202DRG4IC OPAMP CFA 2 CIRCUIT 8SOIC |
4,504 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 2 | - | 9000V/µs | - | 2 GHz | 13 µA | 700 µV | 14mA (x2 Channels) | 120 mA | 6.6 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
THS3122IDRIC OPAMP CFA 2 CIRCUIT 8SOIC |
1,942 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 2 | - | 1550V/µs | 138 MHz | 160 MHz | 6 µA | 4.4 mV | 8.4mA (x2 Channels) | 440 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
THS3122IDRG4IC OPAMP CFA 2 CIRCUIT 8SOIC |
3,199 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 2 | - | 1550V/µs | 138 MHz | 160 MHz | 6 µA | 4.4 mV | 8.4mA (x2 Channels) | 440 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LMH6553MRX/NOPBIC OPAMP CFA 1 CIRC 8SOPWRPAD |
1,171 |
|
Datasheet | LMH®, PowerWise® | 8-PowerSOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Feedback | 1 | Differential | 2300V/µs | - | 900 MHz | 50 µA | - | 29.1mA | 120 mA | 4.5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO PowerPad |
|
|
LMP8603QMA/NOPBIC CURRENT SENSE 1 CIRCUIT 8SOIC |
3,256 |
|
Datasheet | LMP® | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Sense | 1 | - | 0.83V/µs | 60 kHz | - | 0.04 pA | 150 µV | 1.1mA | 48 mA | 3 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA2735AIDG4IC OPAMP ZERO-DRIFT 2 CIRC 8SOIC |
3,768 |
|
Datasheet | Zero-Drift | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | Zero-Drift | 2 | Differential, Rail-to-Rail | 1.5V/µs | 1.6 MHz | - | 100 pA | 1 µV | 600µA (x2 Channels) | 20 mA | 2.7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LMH6552MAX/NOPBIC OPAMP CFA 1 CIRCUIT 8SOIC |
4,074 |
|
Datasheet | LMH®, PowerWise® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Feedback | 1 | Differential | 3800V/µs | - | 1.5 GHz | 60 µA | 1.5 mV | 22.5mA | 80 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA699IDG4IC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
4,066 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | Voltage Feedback | 1 | - | 1400V/µs | 1 GHz | 260 MHz | 3 µA | 1.5 mV | 15.5mA | 120 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
