Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4011CDGNG4IC OPAMP VFB 1 CIRCUIT 8HVSSOP |
1,404 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tube | Obsolete | Voltage Feedback | 1 | - | 310V/µs | 290 MHz | 290 MHz | 2 µA | 1 mV | 7.8mA | 110 mA | 9 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
LMC6464BIN/NOPBIC CMOS 4 CIRCUIT 14DIP |
3,166 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 4 | Rail-to-Rail | 0.028V/µs | 50 kHz | - | 0.15 pA | 250 µV | 90µA (x4 Channels) | 75 mA | 3 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Through Hole | 14-PDIP |
|
TLC2652AI-8DRIC OPAMP ZERO-DRIFT 1 CIRC 8SOIC |
4,169 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | Single-Ended | 3.1V/µs | 1.9 MHz | - | 4 pA | 0.5 µV | 1.5mA | 50 mA | 3.8 V | 16 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA4353EA/250G4IC CMOS 4 CIRCUIT 16SSOP |
4,840 |
|
Datasheet | MicroAmplifier™ | 16-SSOP (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | CMOS | 4 | Rail-to-Rail | 22V/µs | 44 MHz | - | 0.5 pA | 3 mV | 5.2mA (x4 Channels) | 40 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SSOP |
|
THS3125IDRIC OPAMP CFA 2 CIRCUIT 14SOIC |
2,183 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 2 | - | 1550V/µs | 138 MHz | 160 MHz | 6 µA | 4.4 mV | 8.4mA (x2 Channels) | 440 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
THS3125IDRG4IC OPAMP CFA 2 CIRCUIT 14SOIC |
3,397 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 2 | - | 1550V/µs | 138 MHz | 160 MHz | 6 µA | 4.4 mV | 8.4mA (x2 Channels) | 440 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
THS4082IDG4IC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
3,984 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 2 | - | 230V/µs | - | 175 MHz | 1.2 µA | 1 mV | 3.4mA (x2 Channels) | 85 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA659IDRBRIC OPAMP JFET 1 CIRCUIT 8SON |
1,734 |
|
Datasheet | - | 8-VDFN Exposed Pad | Tape & Reel (TR) | Active | J-FET | 1 | - | 2550V/µs | 350 MHz | 650 MHz | 10 pA | 1 mV | 32mA | 70 mA | 7 V | 13 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SON (3x3) |
|
OPA659IDBVRIC OPAMP JFET 1 CIRCUIT SOT23-5 |
3,400 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | J-FET | 1 | - | 2550V/µs | 350 MHz | 650 MHz | 10 pA | 1 mV | 32mA | 70 mA | 7 V | 13 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
OPA653IDBVRIC OPAMP JFET 1 CIRCUIT SOT23-5 |
2,796 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | J-FET | 1 | - | 2675V/µs | - | 500 MHz | 10 pA | 1 mV | 32mA | 70 mA | 7 V | 13 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
