Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA2227UG4IC OPAMP GP 2 CIRCUIT 8SOIC |
2,172 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | - | 2.3V/µs | 8 MHz | - | 2.5 nA | 5 µV | 3.7mA (x2 Channels) | 45 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
THS4032CDIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
3,444 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Voltage Feedback | 2 | - | 100V/µs | 120 MHz | 100 MHz | 3 µA | 500 µV | 8.5mA (x2 Channels) | 90 mA | 9 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
_4040251^B.jpg "OPA547T-1G3")
|
OPA547T-1G3IC OPAMP GP 1 CIRCUIT TO220-7 |
1,289 |
|
Datasheet | - | TO-220-7 | Bulk | Obsolete | General Purpose | 1 | - | 6V/µs | 1 MHz | - | 100 nA | 1 mV | 10mA | 750 mA | 8 V | 60 V | -40°C ~ 85°C | - | - | Through Hole | TO-220-7 |
|
OPA547F/500G3IC OPAMP GP 1 CIRC DDPAK/TO263-7 |
2,405 |
|
Datasheet | - | TO-263-8, D2PAK (7 Leads + Tab), TO-263CA | Tape & Reel (TR) | Obsolete | General Purpose | 1 | - | 6V/µs | 1 MHz | - | 100 nA | 1 mV | 10mA | 750 mA | 8 V | 60 V | -40°C ~ 85°C | - | - | Surface Mount | TO-263 (DDPAK-7) |
|
LM6144BIMIC OPAMP GP 4 CIRCUIT 14SOIC |
1,494 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 25V/µs | 18 MHz | - | 174 nA | 1.3 mV | 750µA (x4 Channels) | 22 mA | 1.8 V | 24 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
TLC274MFKBIC OPAMP GP 4 CIRCUIT 20LCCC |
2,689 |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 4 | - | 3.6V/µs | 2.2 MHz | - | 0.6 pA | 1.1 mV | 2.7mA (x4 Channels) | 30 mA | 3 V | 16 V | -55°C ~ 125°C | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
|
5962-90604012AIC OPAMP GP 4 CIRCUIT 20LCCC |
3,285 |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 4 | - | 3.6V/µs | 2.2 MHz | - | 0.6 pA | 1.1 mV | 2.7mA (x4 Channels) | 30 mA | 4 V | 16 V | -55°C ~ 125°C | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
LM6144AIMIC OPAMP GP 4 CIRCUIT 14SOIC |
2,129 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 25V/µs | 18 MHz | - | 174 nA | 1.3 mV | 750µA (x4 Channels) | 22 mA | 1.8 V | 24 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
|
5962-89494022AIC CMOS 2 CIRCUIT 20LCCC |
3,475 |
|
Datasheet | LinCMOS™ | 20-CLCC | Bulk | Active | CMOS | 2 | - | 5.3V/µs | 2.2 MHz | - | 0.7 pA | 1.1 mV | 1.9mA (x2 Channels) | 30 mA | 4 V | 16 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
5962-90604052AIC CMOS 4 CIRCUIT 20LCCC |
3,416 |
|
Datasheet | LinCMOS™ | 20-CLCC | Bulk | Active | CMOS | 4 | - | 0.05V/µs | 110 kHz | - | 0.7 pA | 1.1 mV | 57µA (x4 Channels) | 30 mA | 4 V | 16 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
