Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
SHC702JMSAMPLE AND HOLD 1-CH 0.6US |
3,912 |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
OPA2541SMQIC OPAMP GP 2 CIRCUIT TO3-8 |
1,011 |
|
Datasheet | - | TO-3-8 | Bulk | Active | General Purpose | 2 | - | 8V/µs | 1.6 MHz | - | 15 pA | 1 mV | 40mA (x2 Channels) | 7 A | 20 V | 80 V | -55°C ~ 125°C | - | - | Through Hole | TO-3-8 |
|
3650KGIC OPAMP ISOLATION 1 CIRC 32CDIP |
3,073 |
|
Datasheet | - | 32-CDIP (0.900", 22.86mm) | Tube | Obsolete | Isolation | 1 | - | 1.2V/µs | - | 15 kHz | 10 nA | 500 µV | 2.3mA | 5 mA | 16 V | 36 V | 0°C ~ 85°C | - | - | Through Hole | 32-CDIP |
|
5962-0722301VFAIC OPAMP DIFF 1 CIRCUIT 16CFP |
4,360 |
|
Datasheet | - | 16-CFlatPack | Bulk | Active | Differential | 1 | Differential | 5100V/µs | 3 GHz | 250 MHz | 8 µA | 1 mV | 37.7mA | 96 mA | 3 V | 5 V | -55°C ~ 125°C | - | - | Surface Mount | 16-CFP |
|
INA4180A1QPWRQ1INA4180-Q1 AUTOMOTIVE, QUAD-CHAN |
973 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | Current Sense | 4 | Rail-to-Rail | 2V/µs | 350 kHz | 350 kHz | 100 nA | 100 µV | - | 8 mA | 2.7 V | 5.5 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 14-TSSOP |
|
TL064BCNE4TL064B QUAD LOW-POWER JFET-INPUT |
975 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 4 | - | 3.5V/µs | 1 MHz | - | 30 pA | 2 mV | 200µA (x4 Channels) | - | 10 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
OPA2314AQDRQ1OPA2314-Q1 - AUTOMOTIVE 1.8V, 3M |
380 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 1.5V/µs | 3 MHz | - | 2 pA | 500 µV | 150µA (x2 Channels) | 20 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
LMH6503MTLMH6503 WIDEBAND, LOW POWER, LIN |
4,086 |
|
Datasheet | LMH® | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | Variable Gain | 1 | - | 1800V/µs | - | 135 MHz | 11 µA | - | 37mA | 90 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
5962-9751401Q2AIC OPAMP GP 2 CIRCUIT 20LCCC |
2,872 |
|
Datasheet | LinCMOS™ | 20-CLCC | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.02V/µs | 5.3 MHz | - | 1 pA | 300 µV | 100µA (x2 Channels) | 50 mA | 2.7 V | 10 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
77043012AIC OPAMP GP 4 CIRCUIT 20LCCC |
3,353 |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 4 | Differential | 0.5V/µs | 1.2 MHz | - | 20 nA | 3 mV | 1.4mA (x4 Channels) | 30 mA | 3 V | 30 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 20-LCCC (8.89x8.89) |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
