Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA2137UIC OPAMP JFET 2 CIRCUIT 8SOIC |
4,354 |
|
Datasheet | MicroAmplifier™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 2 | - | 3.5V/µs | 1 MHz | - | 5 pA | 1.5 mV | 220µA | 60 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
TLE2062CDIC OPAMP JFET 2 CIRCUIT 8SOIC |
4,908 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 2 | - | 3.4V/µs | 2 MHz | - | 4 pA | 900 µV | 625µA (x2 Channels) | 80 mA | 7 V | 36 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
OPA4137UAIC OPAMP JFET 4 CIRCUIT 14SOIC |
4,765 |
|
Datasheet | MicroAmplifier™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 4 | - | 3.5V/µs | 1 MHz | - | 5 pA | 1.5 mV | 220µA | 60 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
OPA170ASDRLTEPIC OPAMP GP 1 CIRCUIT SOT5 |
4,983 |
|
Datasheet | - | SOT-553 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.4V/µs | 1.2 MHz | - | 8 pA | 250 µV | 110µA | - | 2.7 V | 36 V | -40°C ~ 150°C | - | - | Surface Mount | SOT-5 |
|
|
OPA2830IDIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
1,066 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 2 | Rail-to-Rail | 560V/µs | 100 MHz | 290 MHz | 5 µA | 1.5 mV | 8.5mA (x2 Channels) | 82 mA | 2.8 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLV2454AIPWIC OPAMP GP 4 CIRCUIT 14TSSOP |
4,333 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.11V/µs | 220 kHz | - | 500 pA | 300 µV | 23µA (x4 Channels) | 10 mA | 2.7 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
|
TLE2037MDIC OPAMP GP 1 CIRCUIT 8SOIC |
4,235 |
|
Datasheet | Excalibur™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | - | 7.5V/µs | 50 MHz | - | 15 nA | 20 µV | 3.8mA | 50 mA | 8 V | 38 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
LMC6492BEM/NOPBIC CMOS 2 CIRCUIT 8SOIC |
1,975 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 2 | Differential, Rail-to-Rail | 1.3V/µs | 1.5 MHz | - | 0.15 pA | 110 µV | 1.3mA (x2 Channels) | 30 mA | 2.5 V | 15.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
THS4062IDG4IC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
4,864 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Discontinued at Digi-Key | Voltage Feedback | 2 | - | 400V/µs | - | 180 MHz | 3 µA | 2.5 mV | 7.8mA (x2 Channels) | 115 mA | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
TLE2082AIDIC OPAMP JFET 2 CIRCUIT 8SOIC |
4,789 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 2 | - | 40V/µs | 10 MHz | - | 20 pA | 700 µV | 3.1mA (x2 Channels) | 48 mA | 4.5 V | 38 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
