Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLC2652ACPIC OPAMP ZERO-DRIFT 1 CIRC 8DIP |
2,552 |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | Zero-Drift | 1 | Single-Ended | 3.1V/µs | 1.9 MHz | - | 4 pA | 0.5 µV | 1.5mA | 50 mA | 3.8 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
TLE2064MDG4IC OPAMP JFET 4 CIRCUIT 14SOIC |
2,477 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | J-FET | 4 | - | 3.4V/µs | 2 MHz | - | 4 pA | 900 µV | 1.25mA (x4 Channels) | 80 mA | 7 V | 36 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOIC |
|
TL044MJBIC OPAMP GP 4 CIRCUIT 16CDIP |
3,790 |
|
Datasheet | - | 16-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | - | 0.5V/µs | 500 Hz | - | 50 nA | 1 mV | 250µA (x4 Channels) | - | 44 V | 44 V | -55°C ~ 125°C | - | - | Through Hole | 16-CDIP |
|
THS4271DGNIC OPAMP VFB 1 CIRCUIT 8HVSSOP |
2,534 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Active | Voltage Feedback | 1 | - | 1000V/µs | 400 MHz | 1.4 GHz | 6 µA | 5 mV | 22mA | 160 mA | 5 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
|
LMC6082IN/NOPBIC CMOS 2 CIRCUIT 8DIP |
2,082 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | CMOS | 2 | Push-Pull, Rail-to-Rail | 1.5V/µs | 1.3 MHz | - | 0.01 pA | 150 µV | 1.1mA (x2 Channels) | 34 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Through Hole | 8-PDIP |
|
TLE2142AMDIC OPAMP GP 2 CIRCUIT 8SOIC |
1,126 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 45V/µs | 5.9 MHz | - | 700 nA | 275 µV | 6.9mA (x2 Channels) | 50 mA | 4 V | 44 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
THS4509RGTTTHS4509 - 1.9-GHZ, WIDEBAND, LOW |
1,830 |
|
Datasheet | - | 16-VFQFN Exposed Pad | Bulk | Active | Differential | 1 | Differential | 6600V/µs | 3 GHz | 2 GHz | 8 µA | 1 mV | 37.7mA | 96 mA | 3 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 16-VQFN (3x3) |
|
TLE2024ACDWIC OPAMP GP 4 CIRCUIT 16SOIC |
3,646 |
|
Datasheet | Excalibur™ | 16-SOIC (0.295", 7.50mm Width) | Bulk | Obsolete | General Purpose | 4 | - | 0.7V/µs | 2.8 MHz | - | 45 nA | 750 µV | 1.05mA (x4 Channels) | 40 mA | 4 V | 40 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
|
INA146UAIC OPAMP DIFF 1 CIRCUIT 8SOIC |
1,736 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Differential | 1 | - | 0.45V/µs | - | 550 kHz | 50 nA | 1 mV | 570µA | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
THS4032CDRIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
3,617 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Voltage Feedback | 2 | - | 100V/µs | 120 MHz | 100 MHz | 3 µA | 500 µV | 8.5mA (x2 Channels) | 90 mA | 9 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
