Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
INA190A5IDCKTIC CURR SENSE 1 CIRCUIT SC70-6 |
2,460 |
|
Datasheet | Zero-Drift | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | Rail-to-Rail | 0.3V/µs | 27 kHz | - | 500 pA | 3 µV | 48µA | - | 1.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SC-70-6 |
|
INA190A3IDDFTIC CURR SENSE 1 CIRCUIT TSOT23-8 |
2,137 |
|
Datasheet | Zero-Drift | SOT-23-8 Thin, TSOT-23-8 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | Rail-to-Rail | 0.3V/µs | 35 kHz | - | 500 pA | 3 µV | 48µA | - | 1.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | TSOT-23-8 |
|
TLC27L7CDIC CMOS 2 CIRCUIT 8SOIC |
3,394 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 2 | - | 0.03V/µs | 110 kHz | - | 0.6 pA | 1.1 mV | 20µA (x2 Channels) | 30 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
INA290A4IDCKTIC CURR SENSE 1 CIRCUIT SC70-5 |
3,581 |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | - | 2V/µs | - | 850 kHz | 20 µA | 2 µV | 370µA | - | 2.7 V | 20 V | -40°C ~ 125°C | - | - | Surface Mount | SC-70-5 |
|
LMC660AIM/NOPBIC CMOS 4 CIRCUIT 14SOIC |
3,246 |
|
Datasheet | LMC® | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 4 | Push-Pull, Rail-to-Rail | 1.1V/µs | 1.4 MHz | - | 0.002 pA | 1 mV | 1.5mA (x4 Channels) | 40 mA | 4.75 V | 15.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
TLC1078CPE4IC CMOS 2 CIRCUIT 8DIP |
4,865 |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Tube | Active | CMOS | 2 | - | 0.032V/µs | 110 kHz | - | 1 pA | 180 µV | 29µA (x2 Channels) | 30 mA | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LM7322MA/NOPBIC OPAMP GP 2 CIRCUIT 8SOIC |
1,808 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 18V/µs | 20 MHz | - | 1.1 µA | 700 µV | 2.5mA (x2 Channels) | 100 mA | 2.5 V | 32 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OPA177GPIC OPAMP GP 1 CIRCUIT 8DIP |
4,032 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 0.3V/µs | 600 kHz | - | 500 pA | 20 µV | 1.3mA | - | 6 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
INA293B1IDBVTIC CURR SENSE 1 CIRCUIT SOT23-5 |
1,744 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | - | 2.5V/µs | - | 1.3 MHz | 20 µA | 30 µV | 1.5mA | - | 2.7 V | 20 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
LMC6044AIM/NOPBIC CMOS 4 CIRCUIT 14SOIC |
4,618 |
|
Datasheet | LMC® | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 4 | Push-Pull, Rail-to-Rail | 0.02V/µs | 100 kHz | - | 0.002 pA | 1 mV | 52µA (x4 Channels) | 40 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 14-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
