Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
VCA8613YRIC VARIABLE GAIN 8 CIRC 64TQFP |
3,915 |
|
Datasheet | - | 64-TQFP | Tape & Reel (TR) | Obsolete | Variable Gain | 8 | Differential | 300V/µs | 70 MHz | - | 1 nA | - | - | - | 2.85 V | 3.15 V | -40°C ~ 85°C | - | - | Surface Mount | 64-TQFP (10x10) |
|
TLV2442AMJGBIC CMOS 2 CIRCUIT 8CDIP |
133 |
|
Datasheet | LinCMOS™ | 8-CDIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 1.4V/µs | 1.81 MHz | - | 60 pA | 300 µV | 750µA (x2 Channels) | 50 mA | 2.7 V | 10 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Through Hole | 8-CDIP |
|
5962-0051207Q2AIC OPAMP GP 1 CIRCUIT 20LCCC |
117 |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA | 80 mA | 2.7 V | 6 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 20-LCCC (8.89x8.89) |
|
INA101SMIC INST AMP 1 CIRCUIT TO100-10 |
4,890 |
|
Datasheet | - | TO-100-10 Metal Can | Bulk | Active | Instrumentation | 1 | - | 0.4V/µs | - | 300 kHz | 10 nA | 10 µV | 6.7mA | 10 mA | 10 V | 40 V | -55°C ~ 125°C | - | - | Through Hole | TO-100-10 |
|
OPA2111BMIC OPAMP GP 2 CIRCUIT TO99-8 |
1,844 |
|
Datasheet | Difet® | TO-99-8 Metal Can | Bulk | Obsolete | General Purpose | 2 | - | 2V/µs | 2 MHz | - | 1.2 pA | 50 µV | 5mA (x2 Channels) | 10 mA | 10 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | TO-99-8 |
|
LOG100JPIC LOG/LOG 1 CIRCUIT 14CDIP |
1,283 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Tube | Obsolete | Logarithmic and Log Ratio | 1 | - | - | - | 45 kHz | 1 pA | 700 µV | 7mA | 5 mA | 24 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 14-CDIP |
|
|
OPA128JMIC OPAMP GP 1 CIRCUIT TO99-8 |
1,167 |
|
Datasheet | Difet® | TO-99-8 Metal Can | Bulk | Obsolete | General Purpose | 1 | - | 3V/µs | 1 MHz | - | 0.15 pA | 260 µV | 900µA | 10 mA | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | TO-99-8 |
|
|
INA117BMIC OPAMP DIFF 1 CIRCUIT TO99-8 |
4,464 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Obsolete | Differential | 1 | - | 2.6V/µs | - | 200 kHz | - | 120 µV | 1.5mA | 20 mA | 10 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | TO-99-8 |
|
|
TL087CPJFET INPUT OPERATIONAL AMPLIFIER |
10,279 |
|
Datasheet | * | - | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
4127JGIC LOGARITHMIC 2 CIRCUIT 24CDIP |
2,381 |
|
Datasheet | - | 24-CDIP (0.600", 15.24mm) | Tube | Obsolete | Logarithmic | 2 | - | - | - | 90 kHz | 40 nA | 5 mV | 20mA | 5 mA | 28 V | 32 V | -10°C ~ 70°C | - | - | Through Hole | 24-CDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
