Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
5962-9566602QDAIC CMOS 4 CIRCUIT 14CFP |
3,562 |
|
Datasheet | LinCMOS™ | 14-CFlatPack | Bulk | Active | CMOS | 4 | Rail-to-Rail | 0.12V/µs | 200 kHz | - | 1 pA | 200 µV | 140µA (x4 Channels) | - | 2.7 V | 8 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 14-CFP |
|
TLE2072AMJGBIC OPAMP JFET 2 CIRCUIT 8CDIP |
6,280 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 2 | - | 45V/µs | 10 MHz | - | 20 pA | 700 µV | 3.1mA (x2 Channels) | 48 mA | 4.5 V | 38 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 8-CDIP |
|
|
TLC2272AMJGBIC CMOS 2 CIRCUIT 8CDIP |
1,809 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 2.4mA (x2 Channels) | 50 mA | 4.4 V | 16 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Through Hole | 8-CDIP |
|
INA105AMIC OPAMP DIFF 1 CIRCUIT TO99-8 |
1,020 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | Differential | 1 | - | 3V/µs | - | 1 MHz | - | 50 µV | 1.5mA | 20 mA | 10 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | TO-99-8 |
|
|
INA105BMIC OPAMP DIFF 1 CIRCUIT TO99-8 |
1,452 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | Differential | 1 | - | 3V/µs | - | 1 MHz | - | 50 µV | 1.5mA | 20 mA | 10 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | TO-99-8 |
|
THS3201MDGNREPIC OPAMP CFA 1 CIRCUIT 8HVSSOP |
4,448 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Not For New Designs | Current Feedback | 1 | - | 9800V/µs | - | 1.8 GHz | 14 µA | 700 µV | 14mA | 115 mA | 6.6 V | 15 V | -55°C ~ 125°C | - | - | Surface Mount | 8-HVSSOP |
|
TLV2422MFKBIC OPAMP GP 2 CIRCUIT 20LCCC |
137 |
|
Datasheet | LinCMOS™ | 20-CLCC | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.02V/µs | 5.3 MHz | - | 1 pA | 300 µV | 100µA (x2 Channels) | 50 mA | 2.7 V | 10 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
TL082MFKBIC OPAMP JFET 2 CIRCUIT 20LCCC |
108 |
|
Datasheet | - | 20-CLCC | Bulk | Active | J-FET | 2 | - | 13V/µs | 3 MHz | - | 30 pA | 3 mV | 1.4mA (x2 Channels) | 40 mA | 10 V | 30 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 20-LCCC (8.89x8.89) |
|
TLE2142MUBIC OPAMP GP 2 CIRCUIT 10CFP |
425 |
|
Datasheet | Excalibur™ | 10-CDFF | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 45V/µs | 5.9 MHz | - | 700 nA | 290 µV | 6.9mA (x2 Channels) | 50 mA | 4 V | 44 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 10-CFP |
|
|
5962-0051205Q2AIC OPAMP GP 2 CIRCUIT 20LCCC |
118 |
|
Datasheet | - | 20-CLCC | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA (x2 Channels) | 80 mA | 2.7 V | 6 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 20-LCCC (8.89x8.89) |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
