Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4022CDIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
1,155 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Voltage Feedback | 2 | - | 470V/µs | 350 MHz | 350 MHz | 3 µA | 500 µV | 7.8mA (x2 Channels) | 100 mA | 9 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
THS4022IDIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
2,129 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 2 | - | 470V/µs | 350 MHz | 350 MHz | 3 µA | 500 µV | 7.8mA (x2 Channels) | 100 mA | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
VCA2612Y-1/2KIC VARIABLE GAIN 2 CIRC 48TQFP |
1,983 |
|
Datasheet | - | 48-TQFP | Bulk | Active | Variable Gain | 2 | Differential | 300V/µs | 80 MHz | 40 MHz | 1 nA | - | - | 40 mA | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 48-TQFP (7x7) |
|
PGA205BPIC INST AMP 1 CIRCUIT 16DIP |
2,060 |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Bulk | Active | Instrumentation | 1 | - | 0.7V/µs | - | 1 MHz | 500 pA | 10 µV | 5.2mA | 23 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 16-PDIP |
|
OPA928DRHIGH-VOLTAGE FEMTOAMPERE-INPUT-B |
2,240 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 1 | Single Ended, Rail-to-Rail | 7.5V/µs | 2.5 MHz | 2.5 MHz | 0.001 pA | 10 µV | 275µA | 65 mA | 4.5 V | 16 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
5962-0051203QPAIC OPAMP GP 1 CIRCUIT 8CDIP |
154 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA | 80 mA | 2.7 V | 6 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Through Hole | 8-CDIP |
|
5962-9080801MHAIC OPAMP JFET 2 CIRCUIT 10CFP |
817 |
|
Datasheet | - | 10-CDFF | Bulk | Active | J-FET | 2 | - | 3.4V/µs | 2 MHz | - | 4 pA | 900 µV | 625µA (x2 Channels) | 80 mA | 7 V | 36 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 10-CFP |
|
5962-9080902MCAIC OPAMP JFET 4 CIRCUIT 14CDIP |
856 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 4 | - | 3.4V/µs | 2 MHz | - | 4 pA | 900 µV | 1.25mA (x4 Channels) | 80 mA | 7 V | 36 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CDIP |
|
|
TLE2064AMJBIC OPAMP JFET 4 CIRCUIT 14CDIP |
128 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 4 | - | 3.4V/µs | 2 MHz | - | 4 pA | 900 µV | 1.25mA (x4 Channels) | 80 mA | 7 V | 36 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CDIP |
|
THS4601CDDAIC OPAMP GP 1 CIRC 8SOPWRPAD |
4,006 |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 100V/µs | 180 MHz | 440 MHz | 30 pA | 1 mV | 10mA | - | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO PowerPad |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
