Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
5962-9751402QHAIC CMOS 2 CIRCUIT 10CFP |
111 |
|
Datasheet | LinCMOS™ | 10-CDFF | Bulk | Active | CMOS | 2 | Rail-to-Rail | 0.2V/µs | 52 kHz | - | 1 pA | 300 µV | 100µA (x2 Channels) | 50 mA | 2.7 V | 10 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 10-CFP |
|
5962-0051207QCAIC OPAMP GP 1 CIRCUIT 14CDIP |
245 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA | 80 mA | 2.7 V | 6 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Through Hole | 14-CDIP |
|
TLV2422AMFKBIC OPAMP GP 2 CIRCUIT 20LCCC |
1,029 |
|
Datasheet | LinCMOS™ | 20-CLCC | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.02V/µs | 5.3 MHz | - | 1 pA | 300 µV | 100µA (x2 Channels) | 50 mA | 2.7 V | 10 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
TLC2254AMJBIC OPAMP GP 4 CIRCUIT 14CDIP |
608 |
|
Datasheet | LinCMOS™ | 14-CDIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 0.12V/µs | 210 kHz | - | 1 pA | 200 µV | 160µA (x4 Channels) | 50 mA | 4.4 V | 16 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Through Hole | 14-CDIP |
|
|
5962-0051208QCAIC OPAMP GP 2 CIRCUIT 14CDIP |
233 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA (x2 Channels) | 80 mA | 2.7 V | 6 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Through Hole | 14-CDIP |
|
CLC406AJEIC OP AMP LOW PWR WIDE 8-SOIC |
4,723 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Current Feedback | 1 | - | 1500V/µs | - | 160 MHz | 5 µA | 2 mV | 5mA | 70 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
CLC449AJEIC OP AMP MONO 1.2GHZ 8-SOIC |
661 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Current Feedback | 1 | - | 2500V/µs | - | 1.1 GHz | 6 µA | 3 mV | 12mA | 90 mA | 10 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA2111KMIC OPAMP GP 2 CIRCUIT TO99-8 |
3,465 |
|
Datasheet | Difet® | TO-99-8 Metal Can | Bulk | Obsolete | General Purpose | 2 | - | 2V/µs | 2 MHz | - | 3 pA | 300 µV | 5mA (x2 Channels) | 10 mA | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | TO-99-8 |
|
VCA8613YTIC VARIABLE GAIN 8 CIRC 64TQFP |
1,487 |
|
Datasheet | - | 64-TQFP | Tape & Reel (TR) | Obsolete | Variable Gain | 8 | Differential | 300V/µs | 70 MHz | - | 1 nA | - | - | - | 2.85 V | 3.15 V | -40°C ~ 85°C | - | - | Surface Mount | 64-TQFP (10x10) |
|
TLC2652MJGBIC OPAMP ZER-DRIFT 1CIRC 8CDIP |
255 |
|
Datasheet | LinCMOS™ | 8-CDIP (0.300", 7.62mm) | Bulk | Active | Chopper (Zero-Drift) | 1 | Single-Ended | 3.1V/µs | 1.9 MHz | - | 4 pA | 0.6 µV | 1.5mA | 50 mA | 3.8 V | 16 V | -55°C ~ 125°C | - | - | Through Hole | 8-CDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
