Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
INA253A1IPWIC CURR SENSE 1 CIRCUIT 20TSSOP |
307 |
|
Datasheet | Zero-Drift | 20-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | Current Sense | 1 | - | 2.4V/µs | - | 350 kHz | 90 pA | - | 1.8mA | - | 2.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 20-TSSOP |
|
TLC2202CPIC CMOS 2 CIRCUIT 8DIP |
4,441 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 2.7V/µs | 1.9 MHz | - | 4 µA | 2 mV | 5.6mA (x2 Channels) | 50 mA | 4.6 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LM6171BIMIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
2,653 |
|
Datasheet | VIP™ III | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Voltage Feedback | 1 | - | 3600V/µs | 100 MHz | 160 MHz | 1 µA | 1.5 mV | 2.5mA | 116 mA | 5.5 V | 34 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA380AIDRIC TRANSIMPEDANCE 1 CIRC 8SOIC |
2,943 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Transimpedance | 1 | - | 80V/µs | 90 MHz | - | 3 pA | 4 µV | 7.5mA | 150 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
TLV2475CDRIC CMOS 4 CIRCUIT 16SOIC |
1,756 |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 1.5V/µs | 2.8 MHz | - | 2.5 pA | 250 µV | 600µA (x4 Channels) | 35 mA | 2.7 V | 6 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 16-SOIC |
|
INA327EA/2K5IC INST AMP 1 CIRCUIT 10VSSOP |
2,953 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | Rail-to-Rail | - | - | 1 kHz | 200 pA | 20 µV | 2.4mA | 25 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 10-VSSOP |
|
THS7530QPWPRQ1THS7530-Q1 - AUTOMOTIVE, 300MHZ, |
5,246 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) Exposed Pad | Bulk | Active | Variable Gain | 1 | Differential | 1250V/µs | - | 300 MHz | 20 µA | - | 40mA | 37 mA | 4.5 V | 5.5 V | -40°C ~ 85°C | Automotive | AEC-Q100 | Surface Mount | 14-HTSSOP |
|
|
OPA2846IDRIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
4,621 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | - | 600V/µs | 1.65 GHz | - | 10 µA | 150 µV | 25.2mA | 80 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
THS4121IDGNG4IC OPAMP DIFF 1 CIRCUIT 8HVSSOP |
4,228 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Discontinued at Digi-Key | Differential | 1 | Differential | 55V/µs | - | 100 MHz | 1.2 pA | 3 mV | 11mA | 100 mA | 3 V | 3.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
|
THS4121IDGNIC OPAMP DIFF 1 CIRCUIT 8HVSSOP |
2,286 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Active | Differential | 1 | Differential | 55V/µs | - | 100 MHz | 1.2 pA | 3 mV | 11mA | 100 mA | 3 V | 3.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
