Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLC25L4BCNIC CMOS 4 CIRCUIT 14DIP |
10,450 |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Bulk | Obsolete | CMOS | 4 | Single-Ended | 0.04V/µs | 110 kHz | - | 0.2 pA | 340 µV | 2.7mA (x4 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
|
TLC25M4CNIC CMOS 4 CIRCUIT 14DIP |
2,021 |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Bulk | Obsolete | CMOS | 4 | Open Drain | 0.6V/µs | 1.7 MHz | - | 0.6 pA | 1.1 mV | 2.7mA (x4 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
|
TLC254CNIC CMOS 4 CIRCUIT 14DIP |
4,909 |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 4 | Open Drain | 4.5V/µs | 2.2 MHz | - | 0.6 pA | 1.1 mV | 2.7mA (x4 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
LMP7721MAX/NOPBIC OPAMP GP 1 CIRCUIT 8SOIC |
3,683 |
|
Datasheet | LMP®, PowerWise® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 12.8V/µs | 17 MHz | - | 0.003 pA | 26 µV | 1.3mA | 60 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
TLC1078CPIC CMOS 2 CIRCUIT 8DIP |
1,119 |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | - | 0.032V/µs | 110 kHz | - | 1 pA | 180 µV | 29µA (x2 Channels) | 30 mA | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
TLC2652CNIC OPAMP ZERO-DRIFT 1 CIRC 14DIP |
4,280 |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Bulk | Obsolete | Zero-Drift | 1 | Single-Ended | 3.1V/µs | 1.9 MHz | - | 4 pA | 0.6 µV | 1.5mA | 50 mA | 3.8 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
|
TLC2652AINIC OPAMP ZERO-DRIFT 1 CIRC 14DIP |
1,043 |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Bulk | Obsolete | Zero-Drift | 1 | Single-Ended | 3.1V/µs | 1.9 MHz | - | 4 pA | 0.5 µV | 1.5mA | 50 mA | 3.8 V | 16 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
OPA2662AUIC OPAMP TRANSCOND 370MHZ 16SOIC |
2,059 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | Transconductance | 2 | - | - | - | 370 MHz | 1 µA | 12 mV | 3mA (x2 Channels) | 75 mA | 9 V | 11 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-SOIC |
|
|
TLE2072CDIC OPAMP JFET 2 CIRCUIT 8SOIC |
2,165 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 2 | - | 45V/µs | 10 MHz | - | 1 pA | 300 µV | 3.1mA (x2 Channels) | 48 mA | 4.5 V | 38 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
TLV2765CDRIC OPAMP GP 4 CIRCUIT 16SOIC |
3,940 |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.23V/µs | 500 kHz | - | 3 pA | 550 µV | 20µA (x4 Channels) | 10.2 mA | 1.8 V | 3.6 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
