Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA4820IPWRIC OPAMP VFB 4 CIRCUIT 14TSSOP |
1,235 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 4 | Differential | 240V/µs | 250 MHz | 650 MHz | 9 µA | 250 µV | 22.6mA | 85 mA | 4 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
OPA4820IDRIC OPAMP VFB 4 CIRCUIT 14SOIC |
2,460 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 4 | Differential | 240V/µs | 250 MHz | 650 MHz | 9 µA | 250 µV | 22.6mA | 85 mA | 4 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
OPA2356MDGKREPIC CMOS 2 CIRCUIT 8VSSOP |
3,595 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 360V/µs | 200 MHz | 450 MHz | 3 pA | 2 mV | 8.3mA (x2 Channels) | 80 mA | 2.7 V | 5.5 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 8-VSSOP |
|
|
TLC2652AC-14DIC OPAMP ZERO-DRIFT 1CIRC 14SOIC |
1,595 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Zero-Drift | 1 | Single-Ended | 3.1V/µs | 1.9 MHz | - | 4 pA | 0.5 µV | 1.5mA | 50 mA | 3.8 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
TLC2652Q-8DIC OPAMP ZERO-DRIFT 1 CIRC 8SOIC |
4,191 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Zero-Drift | 1 | Single-Ended | 3.1V/µs | 1.9 MHz | - | 4 pA | 0.6 µV | 1.5mA | 50 mA | 3.8 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA4244EA/250IC OPAMP GP 4 CIRCUIT 14TSSOP |
3,113 |
|
Datasheet | MicroAmplifier™ | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | - | 0.1V/µs | 430 kHz | - | 10 nA | 700 µV | 40µA (x4 Channels) | 25 mA | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
|
OPA683IDIC OPAMP CFA 1 CIRCUIT 8SOIC |
520 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 1 | - | 540V/µs | 1.44 GHz | 200 MHz | 3 µA | 1.5 mV | 940µA | 150 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA1013DN8IC OPAMP GP 2 CIRCUIT 8DIP |
3,169 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 2 | - | 0.35V/µs | 600 kHz | - | 7 nA | 200 µV | 350µA (x2 Channels) | - | 5 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
THS4062IDGNIC OPAMP VFB 2 CIRCUIT 8HVSSOP |
4,851 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Active | Voltage Feedback | 2 | - | 400V/µs | - | 180 MHz | 3 µA | 2.5 mV | 7.8mA (x2 Channels) | 115 mA | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
INA253A3IPWIC CURR SENSE 1 CIRCUIT 20TSSOP |
591 |
|
Datasheet | Zero-Drift | 20-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | Current Sense | 1 | - | 2.4V/µs | - | 350 kHz | 90 pA | - | 1.8mA | - | 2.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 20-TSSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
