Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA2830IDGKTIC OPAMP VFB 2 CIRCUIT 8VSSOP |
736 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | Voltage Feedback | 2 | Rail-to-Rail | 560V/µs | 100 MHz | 290 MHz | 5 µA | 1.5 mV | 8.5mA (x2 Channels) | 82 mA | 2.8 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
TLE2072IDIC OPAMP JFET 2 CIRCUIT 8SOIC |
404 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 2 | - | 45V/µs | 10 MHz | - | 1 pA | 300 µV | 3.1mA (x2 Channels) | 48 mA | 4.5 V | 38 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
THS3110IDGNIC OPAMP CFA 1 CIRCUIT 8HVSSOP |
4,361 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Active | Current Feedback | 1 | - | 1300V/µs | - | 100 MHz | 1.5 µA | 3 mV | 4.8mA | 260 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
LPC660IM/NOPBIC CMOS 4 CIRCUIT 14SOIC |
165 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 4 | Push-Pull, Rail-to-Rail | 0.11V/µs | 350 kHz | - | 0.002 pA | 1 mV | 160µA (x4 Channels) | 40 mA | 4.75 V | 15.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
OPA124PAIC OPAMP GP 1.5MHZ SGL LN 8DIP |
35,954 |
|
Datasheet | Difet® | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 1.6V/µs | 1.5 MHz | - | 0.5 pA | 150 µV | 2.5mA | 10 mA | 10 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
TLE2064ACNIC OPAMP JFET 4 CIRCUIT 14DIP |
1,479 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 4 | - | 3.4V/µs | 2 MHz | - | 4 pA | 900 µV | 1.25mA (x4 Channels) | 80 mA | 7 V | 36 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 14-PDIP |
|
|
TLC4502QDG4IC CMOS 2 CIRCUIT 8SOIC |
2,852 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Discontinued at Digi-Key | CMOS | 2 | Rail-to-Rail | 2.5V/µs | 4.7 MHz | - | 1 pA | 10 µV | 2.5mA (x2 Channels) | 50 mA | 4 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
TLC4502QDIC CMOS 2 CIRCUIT 8SOIC |
2,400 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | CMOS | 2 | Rail-to-Rail | 2.5V/µs | 4.7 MHz | - | 1 pA | 10 µV | 2.5mA (x2 Channels) | 50 mA | 4 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LMH6559MFIC BUFFER 1 CIRCUIT SOT23-5 |
1,267 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | Buffer | 1 | - | 4580V/µs | - | 1.75 GHz | 3 µA | 3 mV | 10mA | 74 mA | 3 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
TLE2144ACNIC OPAMP GP 4 CIRCUIT 14DIP |
1,828 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 45V/µs | 5.9 MHz | - | 700 nA | 500 µV | 13.8mA (x4 Channels) | 50 mA | 4 V | 44 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
