Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ISO120G-BIIC OPAMP ISOLATION 1 CIRC 16CDIP |
2,358 |
|
Datasheet | - | 24-CDIP (0.300", 7.62mm), 16 Leads | Tube | Obsolete | Isolation | 1 | - | 2V/µs | - | 60 kHz | - | 10 mV | 4mA | 15 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 16-CDIP |
|
OPA627TDB2IC OPAMP GP 1 CIRCUIT DIE |
4,441 |
|
Datasheet | Difet® | Die | Tube | Obsolete | General Purpose | 1 | - | 55V/µs | 16 MHz | - | 2 pA | 130 µV | 7mA | 45 mA | 9 V | 36 V | 25°C | - | - | Surface Mount | Die |
|
|
LT1013TDJ2IC OPAMP GP 2 CIRCUIT DIE |
2,507 |
|
Datasheet | - | Die | Tube | Obsolete | General Purpose | 2 | - | - | 700 kHz | - | 30 nA | 300 µV | - | 25 mA | - | - | - | - | - | Surface Mount | Die |
|
OPA2541BMIC OPAMP GP 2 CIRCUIT TO3-8 |
4,944 |
|
Datasheet | - | TO-3-8 | Tube | Active | General Purpose | 2 | - | 8V/µs | 1.6 MHz | - | 15 pA | 1 mV | 40mA (x2 Channels) | 7 A | 20 V | 80 V | -25°C ~ 85°C | - | - | Through Hole | TO-3-8 |
|
|
OPA2348TDB2IC CMOS 2 CIRCUIT DIE |
2,662 |
|
Datasheet | - | Die | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 0.5V/µs | 1 MHz | - | 0.5 pA | 1 mV | - | 10 mA | 2.1 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | Die |
|
LF347N/PBIC OPAMP JFET 4 CIRCUIT 14DIP |
2,660 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 4 | - | 13V/µs | 4 MHz | - | 50 pA | 5 mV | 7.2mA (x4 Channels) | - | 36 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
LM301AN/NOPBIC OPAMP GP 1 CIRCUIT 8DIP |
2,049 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 0.5V/µs | 1 MHz | - | 70 nA | 2 mV | 1.8mA | - | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LM324N/PBIC OPAMP GP 4 CIRCUIT 14DIP |
1,265 |
|
Datasheet | LinCMOS™ | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | - | 1 MHz | - | 45 nA | 2 mV | 1.5mA | 40 mA | 3 V | 32 V | 0°C ~ 70°C (TJ) | - | - | Through Hole | 14-PDIP |
|
|
LM348N/PBIC OPAMP GP 4 CIRCUIT 14DIP |
3,178 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 0.5V/µs | 1 MHz | - | 30 nA | 1 mV | 2.4mA (x4 Channels) | 25 mA | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
|
LF411CN/NOPBIC OPAMP JFET 1 CIRCUIT 8DIP |
2,427 |
|
Datasheet | BI-FET II™ | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 1 | - | 15V/µs | 4 MHz | - | 50 pA | 800 µV | 1.8mA | - | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
