Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ISO122JUE410-V INPUT, VOLTAGE SENSING ISOL |
3,823 |
|
Datasheet | - | 28-SOIC (0.295", 7.50mm Width), 8 Leads | Tube | Active | Isolation | 1 | Single-Ended | 2V/µs | - | 50 kHz | - | 20 mV | 5.5mA | 15 mA | 9 V | 36 V | -25°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
ISO122JUG4IC OPAMP ISOLATION 1 CIRC 8SOIC |
4,048 |
|
Datasheet | - | 28-SOIC (0.295", 7.50mm Width), 8 Leads | Tube | Discontinued at Digi-Key | Isolation | 1 | - | 2V/µs | - | 50 kHz | - | 20 mV | 5mA | 15 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA3S2859MRTWREPENHANCED PRODUCT DUAL-CHANNEL 90 |
3,064 |
|
Datasheet | - | 24-WFQFN Exposed Pad | Tape & Reel (TR) | Active | Transimpedance | 2 | Rail-to-Rail | 350V/µs | 900 MHz | 14 MHz | 50 pA | 900 µV | 42mA | 110 mA | 3.3 V | 5.25 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 24-WQFN (4x4) |
|
|
V62/22603-01XEENHANCED PRODUCT DUAL-CHANNEL |
1,602 |
|
Datasheet | - | 24-WFQFN Exposed Pad | Tape & Reel (TR) | Active | Transimpedance | 2 | Single Ended, Rail-to-Rail | 350V/µs | 900 MHz | 14 MHz | 50 pA | 900 µV | 44mA | 74 mA | 3.3 V | 5.25 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 24-WQFN (4x4) |
|
|
OPA846TDB2IC VOLTAGE FEEDBACK 1 CIRC DIE |
1,821 |
|
Datasheet | - | Die | Tube | Obsolete | Voltage Feedback | 1 | - | 625V/µs | 1.75 GHz | - | 10 µA | 150 µV | 12.6mA | 80 mA | 5 V | 12 V | 25°C | - | - | Surface Mount | Die |
|
OPA549TG3IC POWER 1 CIRCUIT TO220-11 |
3,216 |
|
Datasheet | - | TO-220-11 Formed Leads | Tube | Obsolete | Power | 1 | - | 9V/µs | 900 kHz | - | 100 nA | 1 mV | 26mA | 10 A | 8 V | 60 V | -40°C ~ 85°C | - | - | Through Hole | TO-220-11 |
|
|
OPA2277TDD2IC OPAMP GP 2 CIRCUIT DIE |
1,080 |
|
Datasheet | - | Die | Tube | Obsolete | General Purpose | 2 | - | - | - | - | - | 25 µV | - | - | 4 V | 36 V | - | - | - | Surface Mount | Die |
|
OPA637APIC OPAMP GP 1 CIRCUIT 8DIP |
1,309 |
|
Datasheet | Difet® | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 135V/µs | 80 MHz | - | 2 pA | 130 µV | 7mA | 45 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
ISO122PE410-V INPUT, VOLTAGE SENSING ISOL |
1,418 |
|
Datasheet | - | 16-DIP (0.300", 7.62mm), 8 Leads | Tube | Active | Isolation | 1 | Single-Ended | 2V/µs | - | 50 kHz | - | 20 mV | 5.5mA | 15 mA | 9 V | 36 V | -25°C ~ 85°C (TA) | - | - | Through Hole | 8-PDIP |
|
ISO122PG4IC OPAMP ISOLATION 1 CIRC 8DIP |
2,162 |
|
Datasheet | - | 16-DIP (0.300", 7.62mm), 8 Leads | Tube | Discontinued at Digi-Key | Isolation | 1 | - | 2V/µs | - | 50 kHz | - | 20 mV | 5mA | 15 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
