Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
VCA2612Y/250IC VARIABLE GAIN 2 CIRC 48TQFP |
3,829 |
|
Datasheet | - | 48-TQFP | Tape & Reel (TR) | Active | Variable Gain | 2 | Differential | 300V/µs | 80 MHz | 40 MHz | 1 nA | - | - | 40 mA | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 48-TQFP (7x7) |
|
ISO122UE410-V INPUT, VOLTAGE SENSING ISOL |
1,245 |
|
Datasheet | - | 28-SOIC (0.295", 7.50mm Width), 8 Leads | Tube | Active | Isolation | 1 | Single-Ended | 2V/µs | - | 50 kHz | - | 20 mV | 5.5mA | 15 mA | 9 V | 36 V | -25°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
LT1014MJQUAD PRECISION OPERATIONAL AMPLI |
1,585 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | Push-Pull | 0.4V/µs | 700 kHz | - | 12 nA | 60 µV | 350µA (x4 Channels) | 25 mA | 4 V | 44 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CDIP |
|
LMC6042AIJIC CMOS 2 CIRCUIT 8CDIP |
3,044 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | CMOS | 2 | Push-Pull, Rail-to-Rail | 0.02V/µs | 100 kHz | - | 0.002 pA | 1 mV | 26µA (x2 Channels) | 40 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Through Hole | 8-CDIP |
|
INA125TDA2IC INST AMP 1 CIRCUIT DIE |
1,467 |
|
Datasheet | - | Die | Tube | Obsolete | Instrumentation | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | Die |
|
|
OPA2335AMJG0.05UV/C MAX, SINGLE-SUPPLY CMOS |
1,204 |
|
Datasheet | Zero-Drift | 8-CDIP (0.300", 7.62mm) | Tube | Active | Zero-Drift | 2 | Rail-to-Rail | 1.6V/µs | 2 MHz | - | 70 pA | 1 µV | 570µA | 50 mA | 2.7 V | 5.5 V | -55°C ~ 125°C | - | - | Through Hole | 8-CDIP |
|
ACF2101BUG4IC SW INTEG 2 CIRCUIT 24SOIC |
2,489 |
|
Datasheet | - | 24-SOIC (0.295", 7.50mm Width) | Tube | Discontinued at Digi-Key | Switched Integrator | 2 | - | 3V/µs | 2 MHz | - | 0.1 pA | 500 µV | 12mA (x2 Channels) | 25 mA | 14.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 24-SOIC |
|
|
OPA627TDB1IC OPAMP GP 1 CIRCUIT DIE |
3,449 |
|
Datasheet | Difet® | Die | Tube | Obsolete | General Purpose | 1 | - | 55V/µs | 16 MHz | - | 2 pA | 130 µV | 7mA | 45 mA | 9 V | 36 V | 25°C | - | - | Surface Mount | Die |
|
|
VCA8617PAGRIC VARIABLE GAIN 8 CIRC 64TQFP |
3,495 |
|
Datasheet | - | 64-TQFP | Tape & Reel (TR) | Active | Variable Gain | 8 | Differential | 300V/µs | 100 MHz | - | 1 nA | - | - | - | 2.85 V | 3.15 V | -40°C ~ 85°C | - | - | Surface Mount | 64-TQFP (10x10) |
|
VCA8500IRGCRIC VARIABLE GAIN 8 CIRC 64VQFN |
3,164 |
|
Datasheet | - | 64-VFQFN Exposed Pad | Tape & Reel (TR) | Obsolete | Variable Gain | 8 | Differential | - | 15 MHz | 55 MHz | - | 1 mV | 10µA | 20 mA | 3.15 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 64-VQFN (9x9) |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
