Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LM346M/NOPBIC OPAMP GP 4 CIRCUIT 16SOIC |
1,011 |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.4V/µs | 1.2 MHz | - | 50 nA | 500 µV | 1.4mA (x4 Channels) | 20 mA | 3 V | 44 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
LM747HIC OPAMP GP 2 CIRCUIT TO100-10 |
1,799 |
|
Datasheet | - | TO-100-10 Metal Can | Bulk | Obsolete | General Purpose | 2 | - | 0.2V/µs | 250 kHz | - | 500 nA | 5 mV | - | 50 mA | 44 V | 44 V | -55°C ~ 125°C (TA) | - | - | Through Hole | TO-100-10 |
|
LM348M/NOPBIC OPAMP GP 4 CIRCUIT 14SOIC |
1,723 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.5V/µs | 1 MHz | - | 30 nA | 1 mV | 2.4mA (x4 Channels) | 25 mA | 36 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
LM614CWM/NOPBIC OPAMP GP 4 CIRCUIT 16SOIC |
1,030 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.7V/µs | 800 kHz | - | 10 nA | 5 mV | 450µA (x4 Channels) | 25 mA | 4 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
LM614IWM/NOPBIC OPAMP GP 4 CIRCUIT 16SOIC |
1,774 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.7V/µs | 800 kHz | - | 10 nA | 5 mV | 450µA (x4 Channels) | 25 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
LM6181IMIC OPAMP CFA 1 CIRCUIT 16SOIC |
4,778 |
|
Datasheet | VIP™ II | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 1 | - | 2000V/µs | - | 100 MHz | 5 µA | 3.5 mV | 7.5mA | 130 mA | 7 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
LM6181IN/NOPBIC OPAMP CFA 1 CIRCUIT 8DIP |
1,572 |
|
Datasheet | VIP™ II | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Current Feedback | 1 | - | 2000V/µs | - | 100 MHz | 5 µA | 3.5 mV | 7.5mA | 130 mA | 7 V | 32 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
TL082CP/PBIC OPAMP JFET 2 CIRCUIT 8DIP |
4,524 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 2 | - | 13V/µs | 4 MHz | - | 50 pA | 5 mV | 3.6mA (x2 Channels) | 17 mA | 36 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LM13700N/NOPBIC OPAMP TRANSCOND 2 CIRC 16DIP |
4,668 |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Obsolete | Transconductance | 2 | Push-Pull | 50V/µs | 2 MHz | - | 400 nA | 300 µV | 2.6mA (x2 Channels) | 500 µA | 10 V | 36 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 16-PDIP |
|
|
BUF634PIC BUFFER 1 CIRCUIT 8DIP |
1,525 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Buffer | 1 | - | 2000V/µs | - | 180 MHz | 5 µA | 30 mV | 15mA | 250 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
