Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4541YRBARE DIE 850-MHZ PRECISION FULLY |
2,163 |
|
Datasheet | - | Die | Tape & Reel (TR) | Active | Voltage Feedback | 1 | Differential, Rail-to-Rail | 400V/µs | 850 MHz | 150 MHz | 10 µA | 100 µV | 10.1mA | 100 mA | 2.7 V | 5.4 V | -40°C ~ 125°C (TJ) | - | - | Surface Mount | Die |
|
LM10BH/NOPBIC OPAMP GP 1 CIRCUIT TO5-8 |
3,722 |
|
Datasheet | - | TO-205AA, TO-5-8 Metal Can | Tray | Active | General Purpose | 1 | - | - | - | - | 10 nA | 300 µV | 270µA | - | - | - | -25°C ~ 85°C | - | - | Through Hole | TO-5-8 |
|
|
LM10BHIC OPAMP GP 1 CIRCUIT TO5-8 |
3,144 |
|
Datasheet | - | TO-205AA, TO-5-8 Metal Can | Tray | Active | General Purpose | 1 | - | - | - | - | 10 nA | 300 µV | 270µA | - | - | - | -25°C ~ 85°C | - | - | Through Hole | TO-5-8 |
|
|
ISO124UE410-V INPUT, PRECISION VOLTAGE SE |
3,558 |
|
Datasheet | - | 28-SOIC (0.295", 7.50mm Width), 8 Leads | Tube | Active | Isolation | 1 | Single-Ended | 2V/µs | - | 50 kHz | - | 20 mV | 5.5mA | 15 mA | 9 V | 36 V | -25°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
LF442AMH/NOPBIC OPAMP JFET 2 CIRCUIT TO99-8 |
3,778 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 2 | - | 1V/µs | 1 MHz | - | 10 pA | 500 µV | 300µA (x2 Channels) | 6.8 mA | 10 V | 44 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
ACF2101BU/1KIC SW INTEG 2 CIRCUIT 24SOIC |
1,772 |
|
Datasheet | - | 24-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Obsolete | Switched Integrator | 2 | - | 3V/µs | 2 MHz | - | 0.1 pA | 500 µV | 12mA (x2 Channels) | 25 mA | 14.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 24-SOIC |
|
|
ACF2101BU/1KG4IC SW INTEG 2 CIRCUIT 24SOIC |
4,529 |
|
Datasheet | - | 24-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Obsolete | Switched Integrator | 2 | - | 3V/µs | 2 MHz | - | 0.1 pA | 500 µV | 12mA (x2 Channels) | 25 mA | 14.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 24-SOIC |
|
OPA2107AUG4IC OPAMP GP 2 CIRCUIT 8SOIC |
4,327 |
|
Datasheet | Difet® | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | General Purpose | 2 | - | 18V/µs | 4.5 MHz | - | 4 pA | 100 µV | 4.5mA (x2 Channels) | 40 mA | 9 V | 36 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
THS4601CDDAG3IC OPAMP GP 1 CIRC 8SOPWRPAD |
3,048 |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 100V/µs | 180 MHz | 440 MHz | 30 pA | 1 mV | 10mA | - | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO PowerPad |
|
|
OPA2340TDF2IC CMOS 2 CIRCUIT DIE |
4,114 |
|
Datasheet | MicroAmplifier™ | Die | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 0.006V/µs | 5.5 MHz | - | 10 pA | 500 µV | - | 50 mA | - | - | - | - | - | Surface Mount | Die |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
