Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
VCA2615PFBRIC VARIABLE GAIN 2 CIRC 48TQFP |
2,908 |
|
Datasheet | - | 48-TQFP | Tape & Reel (TR) | Active | Variable Gain | 2 | Differential | 100V/µs | 42 MHz | 50 MHz | - | - | - | 60 mA | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 48-TQFP (7x7) |
|
THS4500MDGNEPIC OPAMP DIFF 1 CIRCUIT 8HVSSOP |
2,972 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tube | Active | Differential | 1 | Differential, Rail-to-Rail | 2800V/µs | 300 MHz | 30 MHz | 6.6 µA | - | - | 120 mA | 4.5 V | 15 V | -55°C ~ 125°C | - | - | Surface Mount | 8-HVSSOP |
|
INA118UBG4IC INST AMP 1 CIRCUIT 8SOIC |
1,136 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | Instrumentation | 1 | - | 0.9V/µs | - | 800 kHz | 1 nA | 10 µV | 350µA | 12 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
THS4601CDDARIC OPAMP GP 1 CIRC 8SOPWRPAD |
3,763 |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | - | 100V/µs | 180 MHz | 440 MHz | 30 pA | 1 mV | 10mA | - | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO PowerPad |
|
|
THS4601CDDARG3IC OPAMP GP 1 CIRC 8SOPWRPAD |
2,409 |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | - | 100V/µs | 180 MHz | 440 MHz | 30 pA | 1 mV | 10mA | - | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO PowerPad |
|
LF256HIC OPAMP JFET 1 CIRCUIT TO99-8 |
3,755 |
|
Datasheet | BI-FET™ | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 12V/µs | 5 MHz | - | 30 pA | 3 mV | 5mA | - | 10 V | 44 V | -25°C ~ 85°C | - | - | Through Hole | TO-99-8 |
|
|
THS4601IDDARIC OPAMP GP 1 CIRC 8SOPWRPAD |
2,549 |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | - | 100V/µs | 180 MHz | 440 MHz | 30 pA | 1 mV | 10mA | - | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO PowerPad |
|
|
THS4601IDDARG3IC OPAMP GP 1 CIRC 8SOPWRPAD |
4,481 |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | - | 100V/µs | 180 MHz | 440 MHz | 30 pA | 1 mV | 10mA | - | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO PowerPad |
|
PGA204BPG4IC INST AMP 1 CIRCUIT 16DIP |
1,757 |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Discontinued at Digi-Key | Instrumentation | 1 | - | 0.7V/µs | - | 1 MHz | 500 pA | 10 µV | 5.2mA | - | 9 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 16-PDIP |
|
U5B7741393IC OPAMP GP 1 CIRCUIT TO99-8 |
1,450 |
|
Datasheet | - | TO-99-8 Metal Can | Tape & Reel (TR) | Active | General Purpose | 1 | - | 0.5V/µs | 1 MHz | - | 80 nA | 1 mV | 1.7mA | 25 mA | 10 V | 44 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
