Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLE2064AMDIC OPAMP JFET 4 CIRCUIT 14SOIC |
2,184 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 4 | - | 3.4V/µs | 2 MHz | - | 4 pA | 900 µV | 1.25mA (x4 Channels) | 80 mA | 7 V | 36 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOIC |
|
LMH6881SQ/NOPBIC OPAMP DIFF 1 CIRCUIT 24WQFN |
3,734 |
|
Datasheet | - | 24-WFQFN Exposed Pad | Tape & Reel (TR) | Active | Differential | 1 | Differential | - | - | 2.4 GHz | - | - | 100mA | - | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 24-WQFN (4x4) |
|
OPA657UBG4IC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
4,259 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | - | 700V/µs | 1.6 GHz | 350 MHz | 1 pA | 100 µV | 14mA | - | 8 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LM6142AIMIC OPAMP GP 2 CIRCUIT 8SOIC |
1,800 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 25V/µs | 18 MHz | - | 174 nA | 1.3 mV | 750µA (x2 Channels) | 24 mA | 1.8 V | 24 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
OPA2234U/2K5IC OPAMP GP 2 CIRCUIT 8SOIC |
2,186 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 0.2V/µs | 350 kHz | - | 12 nA | 70 µV | 275µA (x2 Channels) | 22 mA | 2.7 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
INA111APG4IC INST AMP 1 CIRCUIT 8DIP |
2,851 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Instrumentation | 1 | - | 17V/µs | - | 2 MHz | 2 pA | 200 µV | 3.3mA | 30 mA | 12 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
THS4513RGTRIC OPAMP DIFF 1 CIRCUIT 16VQFN |
2,699 |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Differential | 1 | Differential | 5100V/µs | 2.8 GHz | 1.6 GHz | 8 µA | 1 mV | 37.7mA | - | 3 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-VQFN (3x3) |
|
THS3092DDARIC OPAMP CFA 2 CIRC 8SOPWRPAD |
4,141 |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Feedback | 2 | - | 5700V/µs | 145 MHz | 160 MHz | 4 µA | 900 µV | 9.5mA (x2 Channels) | 280 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO PowerPad |
|
TLE2024BMDWG4IC OPAMP GP 4 CIRCUIT 16SOIC |
3,137 |
|
Datasheet | Excalibur™ | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.7V/µs | 2.8 MHz | - | 35 nA | 500 µV | 1.05mA (x4 Channels) | 40 mA | 4 V | 40 V | -55°C ~ 125°C | - | - | Surface Mount | 16-SOIC |
|
|
OPA4131UA/1KIC OPAMP JFET 4 CIRCUIT 16SOIC |
4,749 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | J-FET | 4 | - | 10V/µs | 4 MHz | - | 5 pA | 200 µV | 1.5mA (x4 Channels) | 25 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
