Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS3122IDDARIC OPAMP CFA 2 CIRC 8SOPWRPAD |
2,443 |
|
Datasheet | - | 8-PowerSOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 2 | - | 1550V/µs | 138 MHz | 160 MHz | 6 µA | 4.4 mV | 8.4mA (x2 Channels) | 440 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO PowerPad |
|
THS3115IPWPIC OPAMP CFA 2 CIRCUIT 14HTSSOP |
3,610 |
|
Datasheet | - | 14-PowerTSSOP (0.173", 4.40mm Width) | Tube | Active | Current Feedback | 2 | - | 1550V/µs | - | 110 MHz | 330 nA | 3 mV | 4.9mA (x2 Channels) | 270 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 14-HTSSOP |
|
|
THS3115CPWPIC OPAMP CFA 2 CIRCUIT 14HTSSOP |
1,290 |
|
Datasheet | - | 14-PowerTSSOP (0.173", 4.40mm Width) | Tube | Active | Current Feedback | 2 | - | 1550V/µs | - | 110 MHz | 330 nA | 3 mV | 4.9mA (x2 Channels) | 270 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 14-HTSSOP |
|
LOG104AIDRIC LOG/LOG 1 CIRCUIT 8SOIC |
2,618 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Logarithmic and Log Ratio | 1 | - | 0.5V/µs | - | 45 kHz | 5 pA | 300 µV | 1mA | - | 9 V | 36 V | -5°C ~ 75°C | - | - | Surface Mount | 8-SOIC |
|
|
LOG104AIDRG4IC LOG/LOG 1 CIRCUIT 8SOIC |
4,222 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Logarithmic and Log Ratio | 1 | - | 0.5V/µs | - | 45 kHz | 5 pA | 300 µV | 1mA | - | 9 V | 36 V | -5°C ~ 75°C | - | - | Surface Mount | 8-SOIC |
|
THS4304DBVRIC OPAMP VFB 1 CIRCUIT SOT23-5 |
3,617 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 830V/µs | 870 MHz | 3 GHz | 7 µA | 500 µV | 18mA | - | 2.7 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
TL054AIDIC OPAMP JFET 4 CIRCUIT 14SOIC |
3,199 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 4 | - | 17.8V/µs | 2.7 MHz | - | 30 pA | 500 µV | 8.4mA (x4 Channels) | 80 mA | 10 V | 30 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
OPA4227PAG4IC OPAMP GP 4 CIRCUIT 14DIP |
2,529 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 2.3V/µs | 8 MHz | - | 2.5 nA | 10 µV | 3.7mA (x4 Channels) | 45 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
LMH6514SQ/NOPBIC VARIABLE GAIN 1 CIRC 16WQFN |
4,364 |
|
Datasheet | - | 16-WFQFN Exposed Pad | Tape & Reel (TR) | Active | Variable Gain | 1 | Differential | - | - | 600 MHz | - | - | 107mA | - | 4 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 16-WQFN (4x4) |
|
|
OPA4132UAG4IC OPAMP JFET 4 CIRCUIT 14SOIC |
1,900 |
|
Datasheet | OPAx132 | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 4 | - | 20V/µs | 8 MHz | - | 5 pA | 500 µV | 4mA (x4 Channels) | 40 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
