Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA2132UE4IC OPAMP JFET 2 CIRCUIT 8SOIC |
3,048 |
|
Datasheet | OPAx132 | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 2 | - | 20V/µs | 8 MHz | - | 5 pA | 250 µV | 4mA (x2 Channels) | 40 mA | 5 V | 36 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
OPA2132UG4IC OPAMP JFET 2 CIRCUIT 8SOIC |
2,740 |
|
Datasheet | OPAx132 | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 2 | - | 20V/µs | 8 MHz | - | 5 pA | 250 µV | 4mA (x2 Channels) | 40 mA | 5 V | 36 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
TL084MJBMILITARY-GRADE, QUAD, 30-V, 3-MH |
3,555 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Tube | Active | Standard | 4 | Push-Pull | 13V/µs | 3 MHz | - | 30 pA | 3 mV | 1.4mA (x4 Channels) | 10 mA | 10 V | 30 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CDIP |
|
INA110KU/1KIC INST AMP 1 CIRCUIT 16SOIC |
4,556 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Obsolete | Instrumentation | 1 | - | 17V/µs | - | 2.5 MHz | 20 pA | 200 µV | 3mA | 25 mA | 12 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
|
INA106UG4IC OPAMP DIFF 1 CIRCUIT 8SOIC |
4,919 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | Differential | 1 | - | 3V/µs | - | 1 MHz | - | 50 µV | 1.5mA | 20 mA | 10 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA656UG4IC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
1,556 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | - | 295V/µs | 230 MHz | 500 MHz | 2 pA | 250 µV | 14mA | 70 mA | 8 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LF298H/NOPBIC SAMPL/HOLD 1 CIRCUIT TO99-8 |
4,412 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | Sample and Hold | 1 | - | - | - | - | 5 nA | 1 mV | 4.5mA | - | 10 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | TO-99-8 |
|
OPA445APG4IC OPAMP GP 1 CIRCUIT 8DIP |
3,728 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 15V/µs | 2 MHz | - | 10 pA | 1.5 mV | 4.2mA | 15 mA | 20 V | 90 V | -25°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LMH6515SQ/NOPBIC VARIABLE GAIN 1 CIRC 16WQFN |
4,461 |
|
Datasheet | - | 16-WFQFN Exposed Pad | Tape & Reel (TR) | Active | Variable Gain | 1 | Differential | - | - | 600 MHz | - | - | 107mA | - | 4 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 16-WQFN (4x4) |
|
|
LM6172IMXIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
1,776 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Voltage Feedback | 2 | - | 3000V/µs | 100 MHz | 160 MHz | 1.2 µA | 400 µV | 4.6mA (x2 Channels) | 90 mA | 5.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
