Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS3202DGNG4IC OPAMP CFA 2 CIRCUIT 8HVSSOP |
4,529 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tube | Obsolete | Current Feedback | 2 | - | 9000V/µs | - | 2 GHz | 13 µA | 700 µV | 14mA (x2 Channels) | 120 mA | 6.6 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
VCA2617RHBRIC VARIABLE GAIN 2 CIRC 32VQFN |
1,642 |
|
Datasheet | - | 32-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Variable Gain | 2 | Differential | 100V/µs | 50 MHz | - | - | - | - | 60 mA | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 32-VQFN (5x5) |
|
INA103KPG4IC INST AMP 1 CIRCUIT 16DIP |
2,508 |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Obsolete | Instrumentation | 1 | - | 15V/µs | - | 6 MHz | 2.5 µA | 30 µV | 9mA | 40 mA | 18 V | 50 V | 0°C ~ 70°C | - | - | Through Hole | 16-PDIP |
|
LMH6503MTIC VARIABLE GAIN 1 CIRC 14TSSOP |
3,410 |
|
Datasheet | LMH® | 14-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | Variable Gain | 1 | - | 1800V/µs | - | 135 MHz | 11 µA | - | 37mA | 90 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
|
THS4150CDGNRIC OPAMP DIFF 1 CIRCUIT 8HVSSOP |
2,403 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Active | Differential | 1 | Differential | 650V/µs | 340 MHz | 150 MHz | 4.3 µA | 1.1 mV | 17.5mA | 85 mA | 4 V | 33 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
OPA4131PAIC OPAMP JFET 4 CIRCUIT 14DIP |
4,830 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 4 | - | 10V/µs | 4 MHz | - | 5 pA | 200 µV | 1.5mA (x4 Channels) | 25 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
OPA4131PAG4IC OPAMP JFET 4 CIRCUIT 14DIP |
3,939 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 4 | - | 10V/µs | 4 MHz | - | 5 pA | 200 µV | 1.5mA (x4 Channels) | 25 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
LMH5401IRMSRIC OPAMP DIFF 1 CIRCUIT 14UQFN |
4,207 |
|
Datasheet | - | 14-UFQFN | Tape & Reel (TR) | Active | Differential | 1 | Differential | 17500V/µs | 8 GHz | 1.2 GHz | - | - | 55mA | 50 mA | 3.15 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | 14-UQFN (2.5x2.5) |
|
INA848IDRIC OPAMP CFA 1 CIRCUIT 8SOIC |
4,220 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Feedback | 1 | - | 45V/µs | - | 2.8 MHz | 25 nA | 10 µV | 6.2mA | 30 mA | 8 V | 36 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
OPA2228PG4IC OPAMP GP 2 CIRCUIT 8DIP |
1,512 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 11V/µs | 33 MHz | - | 2.5 nA | 5 µV | 3.7mA (x2 Channels) | 45 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
