Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1058SW#TRPBFIC OPAMP JFET 4 CIRCUIT 16SO |
4,813 |
|
Datasheet | LT® | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | J-FET | 4 | - | 13V/µs | 5 MHz | - | 10 pA | 350 µV | 1.7mA (x4 Channels) | - | 20 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
|
LTC1051CSW#TRPBFIC OPAMP ZERO-DRIFT 2 CIRC 16SO |
4,443 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | Chopper (Zero-Drift) | 2 | - | 4V/µs | 2.5 MHz | - | 15 pA | 0.5 µV | 1mA (x2 Channels) | - | 4.75 V | 16 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SO |
|
AD9632ANIC OPAMP VF ULDIST 70MA 8DIP |
38,523 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Voltage Feedback | 1 | - | 1500V/µs | - | 250 MHz | 2 µA | 2 mV | 16mA | 70 mA | 6 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
AD8390ACP-R2IC AMP DIFF LP LDIST 16LFCSP |
2,774 |
|
Datasheet | - | 16-VQFN Exposed Pad, CSP | Cut Tape (CT) | Obsolete | Differential | 1 | Differential | 300V/µs | - | 60 MHz | 4 µA | 1 mV | 10mA | 400 mA | 10 V | 24 V | -40°C ~ 85°C | - | - | Surface Mount | 16-LFCSP (4x4) |
|
LTC6227IDD#PBFIC OPAMP GP 2 CIRCUIT 10DFN |
3,346 |
|
Datasheet | - | 10-WFDFN Exposed Pad | Tube | Last Time Buy | General Purpose | 2 | Rail-to-Rail | 180V/µs | 420 MHz | 330 MHz | 8.4 µA | 20 µV | 5.5mA (x2 Channels) | 64 mA | 2.8 V | 11.75 V | -40°C ~ 85°C | - | - | Surface Mount | 10-DFN (3x3) |
|
AD8054AR-REEL7IC OPAMP VFB 4 CIRCUIT 14SOIC |
3,543 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Voltage Feedback | 4 | Rail-to-Rail | 190V/µs | - | 160 MHz | 2 µA | 1.8 mV | 2.875mA (x4 Channels) | 30 mA | 3 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
AD845JR-16IC OPAMP JFET 1 CIRCUIT 16SOIC |
4,391 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | J-FET | 1 | - | 100V/µs | 16 MHz | - | 750 pA | 700 µV | 10mA | 50 mA | 9.5 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
AD8330ARQ-REELIC AMP VGA 150MHZ LN LP 16QSOP |
17,497 |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Bulk | Obsolete | Variable Gain | 1 | Differential, Rail-to-Rail | 1500V/µs | - | 150 MHz | 100 nA | - | 20mA | - | 2.7 V | 6 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QSOP |
|
|
AD8330ARQIC AMP VGA 150MHZ LN LP 16QSOP |
4,501 |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Tube | Obsolete | Variable Gain | 1 | Differential, Rail-to-Rail | 1500V/µs | - | 150 MHz | 100 nA | - | 20mA | - | 2.7 V | 6 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QSOP |
|
LT6200CS6#TRPBFIC BUFFER 1 CIRCUIT TSOT23-6 |
3,772 |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Tape & Reel (TR) | Active | Buffer | 1 | Rail-to-Rail | 50V/µs | 165 MHz | - | 23 µA | 2.5 mV | 20mA | - | 2.5 V | 12.6 V | 0°C ~ 70°C | - | - | Surface Mount | TSOT-23-6 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
