Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD746JNIC OPAMP JFET 2 CIRCUIT 8DIP |
3,542 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 2 | - | 75V/µs | 13 MHz | 13 MHz | 110 pA | 300 µV | 7mA | 25 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LTC6431BIUF-20#TRPBFIC OPAMP GP 1 CIRCUIT 24QFN |
1,934 |
|
Datasheet | - | 24-WFQFN Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 1 | - | - | - | 2 GHz | - | - | 93mA | - | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 24-QFN (4x4) |
|
AD8012ARMIC OPAMP CFA 2 CIRCUIT 8MSOP |
3,312 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | Current Feedback | 2 | - | 2250V/µs | 75 MHz | 350 MHz | 3 µA | 1.5 mV | 1.7mA (x2 Channels) | 125 mA | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
AD8271BRMZ-R7IC OPAMP PGA 1 CIRCUIT 10MSOP |
1,783 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Programmable Gain | 1 | Single-Ended | 30V/µs | 15 MHz | - | 500 nA | 300 µV | 2.3mA | 100 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 10-MSOP |
|
|
ADA4077-2TRMZ-EPR7IC OPAMP GP 2 CIRCUIT 8MSOP |
1,564 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 1.2V/µs | 3.6 MHz | 5.5 MHz | 400 pA | 50 µV | 400µA (x2 Channels) | 10 mA | 5 V | 30 V | -55°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
AD8367ARUIC VARIABLE GAIN 1 CIRC 14TSSOP |
2,695 |
|
Datasheet | X-AMP® | 14-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | Variable Gain | 1 | - | - | - | 500 MHz | 27 µA | - | 26mA | - | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
AD9631AR-REELIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
2,135 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Voltage Feedback | 1 | - | 1300V/µs | - | 320 MHz | 2 µA | 3 mV | 17mA | 70 mA | 6 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
AD9631ARIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
1,278 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 1 | - | 1300V/µs | - | 320 MHz | 2 µA | 3 mV | 17mA | 70 mA | 6 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
AD8056ARMZ-REELIC VOLTAGE FEEDBACK 2 CIRC 8MSOP |
2,983 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | - | 1400V/µs | - | 300 MHz | 400 nA | 3 mV | 10mA | 60 mA | 8 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
|
AD8037ANIC OPAMP VF ULDIST LN 70MA 8DIP |
28,251 |
|
Datasheet | CLAMPIN™ | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Voltage Feedback | 1 | - | 1500V/µs | - | 270 MHz | 3 µA | 2 mV | 18.5mA | 70 mA | 6 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
