Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LTC6263IMS#PBFIC OPAMP GP 4 CIRCUIT 16MSOP |
267 |
|
Datasheet | - | 16-TFSOP (0.118", 3.00mm Width) | Tube | Last Time Buy | General Purpose | 4 | Rail-to-Rail | 7V/µs | 30 MHz | - | 10 nA | 50 µV | 245µA (x4 Channels) | 40 mA | 1.8 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 16-MSOP |
|
|
LTC6260IMS#PBFIC OPAMP GP 4 CIRCUIT 16MSOP |
3,208 |
|
Datasheet | - | 16-TFSOP (0.118", 3.00mm Width) | Tube | Last Time Buy | General Purpose | 4 | Rail-to-Rail | 0.24V/µs | 1.3 MHz | - | 5 nA | 100 µV | 20µA (x4 Channels) | 10 mA | 1.8 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 16-MSOP |
|
LT1806IS8#TRPBFIC OPAMP GP 1 CIRCUIT 8SO |
1,002 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 140V/µs | 325 MHz | - | 5 µA | 100 µV | 11mA | - | 2.5 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
|
AD629ARIC OPAMP DIFF 1 CIRCUIT 8SOIC |
4,194 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Sense | 1 | - | 2.1V/µs | - | 500 kHz | - | 200 µV | 900µA | 25 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
AD629AR-REEL7IC OPAMP DIFF 1 CIRCUIT 8SOIC |
4,962 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Sense | 1 | - | 2.1V/µs | - | 500 kHz | - | 200 µV | 900µA | 25 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
AD628ARMZ-RLIC CURRENT SENSE 1 CIRCUIT 8MSOP |
4,260 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 0.3V/µs | - | 600 kHz | 1.5 nA | 150 µV | 1.6mA | - | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
|
LT1999HS8-20#TRPBFIC CURRENT SENSE 1 CIRCUIT 8SO |
2,614 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 3V/µs | - | 2 MHz | 137.5 µA | 500 µV | 5.8mA | - | 4.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
AD548TQIC OPAMP GP 1 CIRCUIT 8CERDIP |
112 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 1.8V/µs | 1 MHz | - | 10 pA | 750 µV | 170µA | 15 mA | 9 V | 36 V | - | - | - | Through Hole | 8-CERDIP |
|
LTC6102HVIDD#TRPBFIC CURRENT SENSE 1 CIRCUIT 8DFN |
3,290 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | 200 kHz | - | 60 pA | 3 µV | 420µA | 1 mA | 5 V | 100 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DFN (3x3) |
|
AD8643ACPZ-R2IC OPAMP JFET 4 CIRCUIT 16LFCSP |
3,607 |
|
Datasheet | - | 16-WFQFN Exposed Pad, CSP | Tape & Reel (TR) | Discontinued at Digi-Key | J-FET | 4 | Rail-to-Rail | 3V/µs | 3.5 MHz | - | 0.25 pA | 70 µV | 200µA (x4 Channels) | 12 mA | 5 V | 26 V | -40°C ~ 125°C | - | - | Surface Mount | 16-LFCSP-WQ (3x3) |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
