Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD745JR-16-REEL7IC OPAMP BIFET 20MHZ ULN 16SOIC |
7,750 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Bulk | Obsolete | J-FET | 1 | - | 12.5V/µs | 20 MHz | 20 MHz | 150 pA | 250 µV | 8mA | 40 mA | 9.6 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
AD626BNIC AMP DIFF LP 12MA 8DIP |
19,590 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Differential | 1 | - | 0.22V/µs | - | 100 kHz | - | 50 µV | 1.5mA | 12 mA | 2.4 V | 10 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
AD9631ANIC OPAMP VF ULDIST 70MA 8DIP |
9,789 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Voltage Feedback | 1 | - | 1300V/µs | - | 320 MHz | 2 µA | 3 mV | 17mA | 70 mA | 6 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LTC6247HTS8#TRPBFIC OPAMP GP 2 CIRCUIT TSOT23-8 |
4,122 |
|
Datasheet | - | SOT-23-8 Thin, TSOT-23-8 | Tape & Reel (TR) | Last Time Buy | General Purpose | 2 | Rail-to-Rail | 90V/µs | 180 MHz | 120 MHz | 400 nA | 100 µV | 1.25mA (x2 Channels) | 100 mA | 2.5 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-8 |
|
LTC6253CDC#TRPBFIC OPAMP GP 2 CIRCUIT 8DFN |
4,027 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Last Time Buy | General Purpose | 2 | Rail-to-Rail | 280V/µs | 720 MHz | 400 MHz | 1.4 µA | 100 µV | 4.25mA (x2 Channels) | 100 mA | 2.5 V | 5.25 V | 0°C ~ 70°C | - | - | Surface Mount | 8-DFN (2x2) |
|
|
AD827JR-16-REEL7IC OPAMP GP 50MHZ DUAL LP 16SOIC |
686 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Bulk | Obsolete | General Purpose | 2 | - | 300V/µs | 50 MHz | - | 3.3 µA | 300 µV | 10mA | 32 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
AD713JNIC OPAMP BIFET QUAD PREC 14DIP |
19,478 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 4 | - | 20V/µs | - | 4 MHz | 10 pA | 300 µV | 10mA | 25 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
AD745AQIC OPAMP JFET 1 CIRCUIT 8CERDIP |
1,493 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 1 | - | 12V/µs | 20 MHz | 20 MHz | 150 pA | 250 µV | 8mA | 40 mA | 9.6 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-CERDIP |
|
LT1970AIFE#TRPBFIC OPAMP GP 1 CIRCUIT 20TSSOP |
3,709 |
|
Datasheet | - | 20-TSSOP (0.173", 4.40mm Width) Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 1 | - | 1.6V/µs | 3.6 MHz | - | 160 nA | 200 µV | 7mA | - | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 20-TSSOP-EP |
|
AD8652ARZ-REELIC CMOS 2 CIRCUIT 8SOIC |
1,958 |
|
Datasheet | DigiTrim® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 41V/µs | 50 MHz | - | 1 pA | 90 µV | 17.5mA | 40 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
