Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMH6640MF/NOPBIC OPAMP VFB 1 CIRCUIT SOT23-5 |
880 |
|
Datasheet | LMH® | SC-74A, SOT-753 | Bulk | Active | Voltage Feedback | 1 | Rail-to-Rail | 170V/µs | 62 MHz | 190 MHz | 1 µA | 1 mV | 4mA | 100 mA | 4.5 V | 16 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
LMH6723MAIC OPAMP CFA 1 CIRCUIT 8SOIC |
463 |
|
Datasheet | LMH® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 1 | - | 600V/µs | - | 370 MHz | 2 µA | 1 mV | 1mA | 110 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LMC662EMIC CMOS 2 CIRCUIT 8SOIC |
310 |
|
Datasheet | LMC® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 2 | Push-Pull, Rail-to-Rail | 1.1V/µs | 1.4 MHz | - | 0.002 pA | 1 mV | 750µA (x2 Channels) | 40 mA | 4.75 V | 15.5 V | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 8-SOIC |
|
CLC5654INIC OPAMP CFA 4 CIRCUIT 14DIP |
13,641 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | Current Feedback | 4 | - | 2000V/µs | - | 450 MHz | 6 µA | 2.5 mV | 5mA (x4 Channels) | 70 mA | 14 V | 14 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
LMH6622MAIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
969 |
|
Datasheet | LMH® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 2 | Differential | 85V/µs | - | 160 MHz | 4.7 µA | 200 µV | 4.3mA (x2 Channels) | 90 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LMP2234AMTIC OPAMP GP 4 CIRCUIT 14TSSOP |
371 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | General Purpose | 4 | Differential, Rail-to-Rail | 0.048V/µs | 130 kHz | - | 0.02 pA | 10 µV | 36µA (x4 Channels) | 30 mA | 1.6 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
CLC426AJPIC VOLTAGE FEEDBACK 1 CIRC 8MDIP |
3,550 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Voltage Feedback | 1 | - | 400V/µs | 230 MHz | 130 MHz | 5 µA | 1 mV | 11mA | 70 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-MDIP |
|
CLC5644IMXIC OPAMP CFA 4 CIRCUIT 14SOIC |
1,113 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Current Feedback | 4 | - | 1000V/µs | - | 170 MHz | 2.5 µA | 2.5 mV | 2.5mA (x4 Channels) | 70 mA | 14 V | 14 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
CLC5644IMIC OPAMP CFA 4 CIRCUIT 14SOIC |
264 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 4 | - | 1000V/µs | - | 170 MHz | 2.5 µA | 2.5 mV | 2.5mA (x4 Channels) | 70 mA | 14 V | 14 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
LMC6464BIMXIC CMOS 4 CIRCUIT 14SOIC |
1,276 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 4 | Rail-to-Rail | 0.028V/µs | 50 kHz | - | 0.15 pA | 250 µV | 90µA (x4 Channels) | 75 mA | 3 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 14-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
